View AGM3224J_752290.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ DISPLAYS, INC.
COMPLETE LCD SOLUTIONS
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
PART NUMBER: REVISED:
AGM3224J Series Spetember 25, 2006
General Specifications
Item Display Pattern Color Standard Value Graphic Mono. Character with ICON Grayscale mm mm mm mm mm mm mm TN, Negative HTN, Negative STN, Gray FSTN, Negative Color STN Reflective STN, Blue Segment Unit
Module Dimension (W x H x T) 16 .0(W) X109(H) X .0(T) Viewing Area (W x H) Active Area (W x H) Character Size (W x H) Character Pitch (W x H) DOT Size (W x H) DOT Pitch (W x H) 121.0(W) X 91. (H) 115.17(W) x 86.37(H) \ \ 0.33(W) x 0.33(H) 0.36(W) x 0.36(H) TN, Positive HTN, Positive LCD Type STN, Yellow-Green FSTN, Positive FM LCD Polarizer Type View Direction LCD Controller LCD Driver LCD Driving Method Interface Type Backlight Type Backlight Color EL/CCFL Driver type DC-DC Converter Operation Temperature Storage Temperature Transflective Anti-Glare 6H S1D13700 NT Serial Parallel LED Segment +NT7702(Common) I2C 6800 Bottom EL Yellow-Green Blue Build-in Build-in TOPL = 0 TOPH = 45 TSTL = -25 TSTH =60 4-line SPI 8080 4-bit Dual Side 3-line SPI 12H
Transmissive
1/240 duty, 1/15 bias
Single Side CCFL White Red Amber
External External
o
C C
o
Page 1
Electro-optical Specifications
Absolute Maximum Ratings
No 1 2 3 Item Supply Voltage For Logic Supply Voltage For LCD Driver Input Voltage Symbol VDD -VSS VLCD VI Min. -0.3 -0.3 VSS-0.3 Max. 7.0 30.0 VDD+0.3 Unit V V V
Note: Operating Temperature and Storage Temperature can be found in 1.General Specifications.
Optical Characteristics(1)
No 1 2 3 4 5 6 7 Viewing Angle Item Contrast Ratio Response time Response time 6H 12H 3H 9H Symbol Condition Cr TON TOFF 1 2 3 4 Cr = 2 Ta=23+3 oC Ta=23+3oC VLCD = Typ. (2) Ta=23+3oC Ta=23+3 oC Min. Typ. 3.0 230 320 48 23 48 46 Max. 3.5 250 350 Unit ms ms Deg. Deg. Deg. Deg.
Note: (1) See Appendix Definition of Optical Characteristics for detail. (2) VLCD can be found in 4.2 Electrical Characteristics Supply Voltage for LCD Driver
Electrical Characteristics
No 1 2 3 4 5 6 7 8 Item Supply Voltage for Logic Supply Current for Logic Frame Frequency Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Supply Current Backlight Supply Voltage Backlight for for CCFL CCFL Symbol Condition VDD-VSS Ta=23+3 oC -.... Ta=23+3 oC VLED = Typ. Ta=23+3 oC ILED = Typ. Ta=23+3 oC IDD fM VIH VIL VOH VOL Min. 3.2 21.8 70 Typ. 3.3 22.0 75 Max. 3.4 22.2 3.0 80 VDD VDD Unit V V mA Hz V V
Supply Voltage for LCD Driver VLCD
0.8 VDD VSS VSS 0.8 VDD -
0.2 VDD V 0.2 VDD V
9 10
ICCFL VCCFL
-
5.0 500
6.0 -
mA V
Page 2
Timing Characteristics
Note: See Data sheet of S1D13700 for detail.
Page 3
I/O Terminal
Pin Description
Pin NO. 1 2 3 4 5 6 7 8 9-16 Symbol V0 VDD VSS /CS /RES A0 /RD /WR D0-D7 Function Description Power Supply for LCD Driver. (22V) Power Supply for Logic Cuicuit Ground Chip select input. Data input is enable when CS is LOW. When RES is caused to go LOW, initialization is executed. It identifies the data from MPU as display data or command. HIGH: identified as display data or a command parameter. LOW: identified as a command P/S=LOW : High impedance P/S=HIGH : Parallel interface read signa P/S=LOW : High impedance P/S=HIGH : Parallel interface write signal 8-bit bi-directional data bus.
Block Diagram
Page 4
Programming
Instruction Table(1)
(1) Note: See Data sheet of S1D13700 for detail.
Display Data RAM
Page 5
Page 6
(1) Note: See Relationship between Display Memory and Screens of S1D13700 for detail.
Page 7
AZ Displays, Inc.
AGM3224J

▲Up To Search▲

Price & Availability of AGM3224J

	To Download AGM3224J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .