 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series 218 SMT DIP (R) SMT half pitch DIP switch - Auto placeable Features Optimized Mechanical Features * Removable tape seal to withstand IR vapor phase or wave soldering temperatures, board washing * Gull-wing and "J" bend terminal configurations * Low profile actuators prevent accidental actuation * SPST configuration, 2, 4, 6, 8, 10, and 12 positions * Coplanarity: 0.1 mm/.004" maximum Optimized Contact System * Redundant, wiping contact * Contactor does not deflect during actuation * 0.6 mm/0.024" actuator travel Materials * Gold plated contacts, gold flash plated terminals * Copper alloy contactor * High temperature materials (UL 94V-0) Electrical and Mechanical Specifications Switch Function Single pole single throw Switch Contact Resistance 100 milliohms maximum initial 100 milliohms maximum after 1,000 cycles switch Insulation Resistance 100 megohms minimum across open switch 100 megohms minimum between adjacent closed switches Dielectric Strength 300 VDC maximum for 1 minute Nonswitching Rating 100 mA or 50 VDC Switch Capacitance 10 pF maximum between adjacent closed switches Operating Temperature -40C to +85C Actuation Life 1,000 cycles switching 25 mA @ 24 VDC Coplanarity Coplanarity of 0.1 mm / .004" maximum Allowable Solder Time IR and vapor phase-up to 30 seconds with 260C Wave-up to 6 seconds at 260C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15 G's between 10 HZ to 2 KHz) with no contact inconsistencies greater than 1 microsecond. Shock Per MIL-STD-202F, method 213B, condition A (50 G's) with no contact inconsistencies greater than 1 microsecond. Sealing Bottom seal standard Top tape seal optional Marking Special marking available-consult CTS Technical Data Sheet 4218C CTS CORPORATION / MANUFACTURER OF RELIABLE ELECTRONIC COMPONENTS CTS SERIES 218 218 - Gull Wing Leads ON TRAVEL 0.6 .024 1.270.1 .050.004 TYP . TYP . 5.8 .228 2.65 MAX. .104 0.180.1 .007.004 .508 .020 8.44 .332 DIM "A" CTS MOUNTING SURFACE 0.450.1 .018.004 DIMENSION: MM INCH 218 - "J" Leads ON TRAVEL 0.6 .024 1.27 0.1 .050 .004 CTS 2.65 MAX .104 MAX TYP . 5.8 .228 DIM "A" 0.45 0.1 .018 0.004 0.180.1 .007.004 + 0.15 6.05 - 0.08 + .006 .238 - .003 0.90 .035 3.200.15 .126.006 MOUNTING SURFACE 1.27 .050 0.51 .020 Gull Wing Surface Mount Pad Layouts 1.27 .050 0.51 .020 "J" Lead Surface Mount Pad Layouts 1.27 .050 6.60 .260 2 4 CTS 218-XX 1.27 8.89 .050 .350 6 MM INCH 0.76 .030 DIME NS ION: 0.76 .030 8 10 12 Order Information (P MEANS SECTION NO.) "A"OVERAL DIMENSION 3.71 / .146 6.25 / .246 8.79 / .346 11.33 / .446 13.87 / .546 16.41 / .646 Part Number Code For Ordering 218 XX LP S T J F F: Off Position (optional) J: J Bend Terminal (optional) T: Top Tape Seal NO. OF S. W. SECTIONS 2 4 6 8 10 12 XX: Number of Positions LP: Low Profile Actuator S: Bottom Epoxy Seal For J bend terminal or switch shipped in off position, add the letter "J" or "F" to part number (ie, 218-2LPSTJF). Order From: CTS CORPORATION, RESISTOR/ELECTROCOMPONENTS / 406 Parr Road / Berne, Indiana 46711 TEL: (260) 589-3111 / FAX: (260) 589-3243 http://www.ctscorp.com CTS COMPONENTS TAIWAN, LTD. / 7, Central 6th Road / Kaohsiung Export Processing Zone / Kaohsiung, Taiwan 806, Rep. of China TEL: (07) 821-6145 / FAX: (07) 811-0040 July, 03 |
Price & Availability of 218-06LPSTJF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |