View PAA132_634053.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PAA132
Dual Pole OptoMOS(R) Relays
Blocking Voltage Load Current Max RON
PAA132 50 600 1
Units V mA
Description PAA132 is a dual 50V, 600mA, 1 1-Form-A relay. This performance leader features very high load current handling capabilities.The dual pole relays save board space by incorporating both relays in a single 8-pin package.
Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available
Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * Certified to: * EN 60950 * EN 41003
Ordering Information Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls * Automotive
Part # PAA132 PAA132S PAA132STR Description 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1,000/Reel)
Pin Configuration
PAA132 Pinout
AC/DC Configuration + Control - Switch #1 Control - Switch #1 + Control - Switch #2 Control - Switch #2 1 2 3 4 8 7 6 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2
Switching Characteristics of Normally Open (Form A) Devices
10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF
DS-PAA132-R01.6
www.clare.com
1
PAA132
Absolute Maximum Ratings (@ 25 C)
Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Blocking Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.)
1 2
Min -40 -40 -
Typ Max Units - 1501 mW 50 mA 1 A 5 V 50 V - 8002 mW 3750 VRMS +85 C +125 C +260 +220 C C
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.
Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C
Electrical Characteristics
Parameter Conditions Output Characteristics @ 25C Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current 10ms On-Resistance AC/DC Configuration IL=600mA DC Configuration IL=1.0A Off-State Leakage Current VL=50V Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off IF=5mA, VL=10V Output Capacitance 50V; f=1MHz Input Characteristics @ 25C Input Control Current IL=600mA Input Dropout Current Input Voltage Drop IF=10mA Reverse Input Current VR=5V Common Characteristics @ 25C Input to Output Capacitance Symbol Min Typ Max Units
IL IL ILPK RON RON ILEAK TON TOFF IF IF VF IR CI/O
5 0.4 0.9 -
100 0.7 1.2 3
600 1.2 2.0 1.0 0.3 1 5 2 50 1.4 10 -
mA A A A ms ms pF mA mA V A pF
2
www.clare.com
R01.6
PAA132
PERFORMANCE DATA*
PAA132 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC
35 35 30 30
PAA132 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 600mADC)
PAA132 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C)
35 30
Device Count (N)
Device Count (N)
25 20 15 10 5
Device Count (N)
25 20 15 10 5
25 20 15 10 5 0
0 1.21 1.22 1.23 1.24 1.25 0 0.69 0.70 0.71 0.72 0.73 0.74 0.75
90.3
90.5
90.7
90.9
91.2
91.3
91.4
LED Forward Voltage Drop (V)
On-Resistance ()
Blocking Voltage (V)
PAA132 Typical IF for Switch Operation Ambient Temperature = 25C Load Current = 600mA
25 25
PAA132 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 120mADC)
25
PAA132 Typical Turn-On Time (N=50 Ambient Temperature = 25C) Load Current = 600mA IF =5mA
20
Device Count (N)
Device Count (N)
15
15
Device Count (N)
0.55 0.60 0.65 0.70 0.75 0.80 0.85
20
20
15
10
10
10
5
5
5
0 0.60 0.65 0.70 0.75 0.80 0.85 0.90
0
0 0 1 1.1 1.3 1.5 1.7 1.8
LED Current (mA)
LED Current (mA)
Turn-On (ms)
PAA132 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) Load Current = 600mA IF =5mA
35
Load Current (A)
Leakage (A)
30 25 20 15 10 5 0 0.30 0.35 0.40 0.45 0.50 0.55 0.60
0.65 0.6 0.55 0.5 0.45 0.4 0.35 0.3 0.25 0.2
PAA132 Maximum Load Current (AC/DC) vs. Temperature
One Poles Operating Two Poles Operating
PAA132 Leakage vs. Temperature (Measured Across Pins 6 &4)
0.009 0.008 0.007 0.006 0.005 0.004 0.003 0.002 0.001 -40 -20 0 20 40 60 80 100
Device Count (N)
IF=10mA IF=5mA IF=10mA IF=5mA
-40 -20
0
20
40
60
80 100 120
Turn-Off (ms)
Temperature (C)
Temperature (C)
PAA132 Typical Blocking Voltage vs. Temperature
Blocking Voltage (VRMS)
96 94 92 90 88 86 84 82 80 -40 -10 0 20 40 60 80 100
5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0
PAA132 Typical Turn-On vs. Temperature Load Current = 600mA
5mA
-40
-20
0
20
40
60
80
100
0.70 0.65 0.60 0.55 0.50 0.45 0.35 0.30 0.25 0.20 0
PAA132 Typical Turn-Off vs. Temperature Load Current = 600mA
Turn-On (ms)
Turn-Off (ms)
5mA
-40
-20
0
20
40
60
80
100
Temperature (C)
Temperature (C)
Temperature (C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01.6
www.clare.com
3
PAA132
PERFORMANCE DATA*
PAA132 LED Forward Voltage Drop vs. Temperature
LED Forward Voltage Drop (V)
1.40 1.35
Turn-On (ms)
1.25 1.20 1.15 1.10 1.05 1.00 -40 -20 0 20 40 60 80 100 120
5mA
0
5 10 15 20 25 30 35 40 45 50
LED Forward Current (mA)
Turn-Off (ms)
1.30
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
PAA132 Typical Turn-On vs. LED Forward Current (Load Current = 600mADC)
0.7 0.6 0.5 0.4 0.3 0.2 0.1 0
PAA132 Typical Turn-Off vs. LED Forward Current (Load Current = 600mADC)
0
5 10 15 20 25 30 35 40 45 50
LED Forward Current (mA)
Temperature (C)
PAA132 Typical On-Resistance vs. Temperature (Load Current @600 mA AC/DC; IF=5mA)
1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -40 -20 0 20 40 60 80 100
PAA132 Typical IF for Switch Operation vs. Temperature Load Current = 600mA
1.2 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0 -40 -20 0 20 40 60 80 100
PAA132 Typical IF for Switch Dropout vs. Temperature Load Current = 600mA
Two Pole Operation LED Current (mA)
On-Resistance ()
LED Current (mA)
1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0 -40 -20 0 20 40 60 80 100
One Pole Operation
Temperature (C)
Temperature (C)
Temperature (C)
PAA132 Typical Load Current vs. Load Voltage Ambient Temperature = 25C IF =5mA
1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 0.6 0.4 0.2 0 0.2 0.4 0.6
PAA132 Energy Rating Curve
1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s
Load Current (mA)
Load Voltage (V)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
4
www.clare.com
R01.6
PAA132
MECHANICAL DIMENSIONS
8 Pin DIP Through Hole (Standard)
9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 3.302 7.239 TYP. (0.285 TYP.) (0.130) 6.350 0.127 (0.250 0.005) 9.144 TYP. (0.360 TYP.) 0.457 0.076 (0.018 0.003) 8.077 0.127 (0.318 0.005 ) 9.144 0.508 (0.360 0.020) 2.540 0.127 (0.100 0.005)
PC Board Pattern (Top View)
(8-0.031 DIA.)
2.540 0.127
8-0.800 DIA. (0.100 0.005)
6.350 0.127 (0.250 0.005)
7.620 0.127 (0.300 0.005)
7.620 0.127 (0.300 0.005)
8 Pin DIP Surface Mount ("S" Suffix)
2.540 0.127 7.620 0.254 (0.300 0.010) 4.445 0.127 (0.175 0.005) 3.302 (0.130) (0.100 0.005)
9.652 0.381 (0.380 0.015)
PC Board Pattern (Top View) 2.540 0.127
(0.100 0.005)
6.350 0.127 (0.250 0.005)
9.525 0.254 (0.375 0.010) 1.905 0.127 (0.075 0.005)
8.305 0.127 (0.327 0.005)
0.635 TYP. (0.025 TYP.) 0.254 TYP. (0.010 TYP.) 0.457 0.076 (0.018 0.003)
1.498 0.127 (0.059 0.005) 8.077 0.127 (0.318 0.005)
Tape and Reel Packaging for Surface Mount Package
330.2 DIA. (13.00 DIA.)
Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 W = 16.30 max (0.642 max) Bo = 10.30 (0.406) Top Cover Tape
Embossed Carrier
P = 12.00 (0.472)
Ao = 10.30 (0.406)
K = 4.2 Embossment (0.165) K = 4.90
0 1
User Direction of Feed
(0.193)
NOTE:
Tape dimensions not shown, comply with JEDEC Standard EIA-481-2
Dimensions mm (Inches)
R01.6
www.clare.com
5
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA132-R01.6 (c)Copyright 2003, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 5/21/03

▲Up To Search▲

Price & Availability of PAA132

	To Download PAA132 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .