View LA6358NT_351959.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number: ENN5234A
Monolithic Linear IC
LA6358N, 6358NS, 6358NM, 6358NT
High-Performance Dual Operational Amplifiers
Overview
The LA6358 is an IC integrating two high-performance operational amplifiers in a single package. This operational amplifier contains an internal phase compensator and is designed to operate from a single power supply over a wide range of voltages. As with conventional general-purpose operational amplifiers, operation from dual power supplies is also possible and power dissipation is very low. This IC can be used widely in commercial and industrial applications including various transducer amplifiers and DC amplifiers.
Package Dimensions
unit: mm 3001C
[LA6358N]
9.14 8 5
7.62 6.4
1.0
1
4
3.9max (3.0)
Features
* Eliminates need for phase compensation * Wide range of operating supply voltage: 3.0 to 30.0 V (single power supply) 1.5 to 15.0 V (dual power supply) * Input voltage swingable down to nearly ground level and output voltage range VOUT of 0 to VCC - 1.5 V * Low current dissipation: ICC = 0.5 mA typ/VCC = +5 V, RL = * Miniflat package permitting the LA6358NM-applied sets to be made small
0.51min
0.5 (0.76) 2.54
1.4
3.2
SANYO: DIP-8 (300mil)
unit: mm 3017D
[LA6358NS]
22.0 3.0
5.7 max
0.51 min
(4.5)
1 (0.84) 2.54 0.5
9 1.3
3.2
0.25 1.35
SANYO: SIP-9
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22003RM (II) No. 5234-1/6
0.25
LA6358N, 6358NS, 6358NM, 6358NT
Package Dimensions
unit: mm 3032C
[LA6358NM]
5.1 8 5 8 3.0 5
unit: mm 3245A
[LA6358NT]
4.4 6.4
1 (0.65) 1.27
4 0.35
1.7max
0.63
0.15
0.65 0.53
1
4 0.25 0.125
(1.5)
SANYO: MFP8
0.08
0.1
0.85 1.1max
3.0 4.9
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum Supply Voltage Differential Input Voltage Maximum Input Voltage Allowable Power Dissipation Symbol VCC VID VIN max Pd max Ta 25C Ta 25C Ta 25C Operating Temperature Storage Temperature Topr Tstg LA6358N, 6358NS LA6358NM LA6358NT Conditions Ratings 32 32 -0.3 to +32 570 300 170 -30 to +85 -55 to +125 Unit V V V mW mW mW C C
Operating Characteristics at Ta = 25C, VCC = +5 V
Parameter Input Offset Voltage Input Offset Current Input Bias Current Common-Mode Input Voltage Range Common-Mode Rejection Ratio Large Signal Voltage Gain Output Voltage Range Power Supply Rejection Ratio Channel Separation Current Dissipation Output Current (Source) Output Current (Sink) Symbol VIO IIO IB VICM CMRR VG VO SVRR CS ICC IO source IO sink VIN+ = 1 V, VIN- = 0 V VIN+ = 0 V, VIN- = 1 V f = 1 k to 20 kHz VCC = 15 V, RL 2 k 2 1 9 7 10 11 20 10 IIN(+)/IIN(-) IIN(+)/IIN(-) Conditions Test Circuit min 1 6 4, 5 3 3 0 65 25 0 65 100 120 0.5 40 20 1.2 80 100 VCC-1.5 Ratings typ 2 5 45 max 7 50 250 VCC-1.5 Unit mV nA nA V dB V/mV V dB dB mA mA mA
0.5
SANYO: MSOP8
No. 5234-2/6
LA6358N, 6358NS, 6358NM, 6358NT
Equivalent Circuit
Pin Assignment
LA6358N LA6358NM LA6358NT
Test Circuits
1. VIO, SVRR 2. VO
3. CMRR, VICM
4. I B (+)
No. 5234-3/6
LA6358N, 6358NS, 6358NM, 6358NT 5. I B (-) 6. I IO
7. I CC
8. SR
Oscilloscope
rectangular wave
9. Channel Separation CS
10. Output Current IO source
11. Output Current IO sink
No. 5234-4/6
LA6358N, 6358NS, 6358NM, 6358NT
No. 5234-5/6
LA6358N, 6358NS, 6358NM, 6358NT
Sample Application Circuits
Noninverting DC amplifier Inverting AC amplifier Rectangular wave oscillator
Unit (resistance: , capacitance: F)
Allowable power dissipation, Pd max - mW
Pd max - Ta
800
600 570
LA
63
58
N,
63
400 300 200 170
LA6
58 NS
358
NM
8 NT
L A 6 35
70 0 0 20 40 60 80 100
Ambient temperature, Ta - C
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products (including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of February, 2003. Specifications and information herein are subject to change without notice.
PS No. 5234-6/6

▲Up To Search▲

Price & Availability of LA6358NT

	To Download LA6358NT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .