View XN04110_329162.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Composite Transistors
XN04110 (XN4110)
Silicon PNP epitaxial planar transistor
Unit: mm
For digital circuits/switching s Features
* Two elements incorporated into one package (Transistors with builtin resistor) * Reduction of the mounting area and assembly cost by one half
4
2.90+0.20 -0.05 1.90.1 (0.95) (0.95) 5 6
0.16+0.10 -0.06
1.50+0.25 -0.05
2.8+0.2 -0.3
3
2
1
s Basic Part Number of Element
* UNR1110 (UN1110) x 2 elements
0.30+0.10 -0.05 0.50+0.10 -0.05 10
1.1+0.2 -0.1
(0.65)
s Absolute Maximum Ratings Ta = 25C
Parameter Rating of element Total Collector to base voltage Collector to emitter voltage Collector current Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO IC PT Tj Tstg Rating -50 -50 -100 300 150 -55 to +150 Unit V V mA mW C C
1: Collector (Tr1) 2: Base (Tr2) 3: Emitter (Tr2) EIAJ: SC-74
0 to 0.1
Marking Symbol: BI Internal Connection
4 Tr2 3 2 5 6 Tr1 1
s Electrical Characteristics Ta = 25C 3C
Parameter Collector to base voltage Collector to emittter voltage Collector cutoff current Symbol VCBO VCEO ICBO ICEO Emitter cutoff current DC current gain Collector to emitter saturation voltage High level output voltage Low level output voltage Input resistance Gain bandwidth product IEBO hFE VCE(sat) VOH VOL R1 fT VCB = -10 V, IE = 1 mA, f = 200 MHz Conditions IC = -10 A, IE = 0 IC = -2 mA, IB = 0 VCB = -50 V, IE = 0 VCE = -50 V, IB = 0 VEB = -6 V, IC = 0 VCE = -10 V, IC = -5 mA IC = -10 mA, IB = - 0.3 mA VCC = -5 V, VB = - 0.5 V, RL = 1 k VCC = -5 V, VB = -2.5 V, RL = 1 k -30% 47 80 -4.9 - 0.2 +30% 160 Min -50 -50 - 0.1 - 0.5 - 0.01 460 - 0.25 V V V k MHz mA Typ Max Unit V V A
Note) The part number in the parenthesis shows conventional part number.
Publication date: May 2002 SJJ00226AED
1.1+0.3 -0.1
4: Collector (Tr2) 5: Base (Tr1) 6: Emitter (Tr1) Mini6-G1 Package
0.40.2
5
1
XN04110
PT T a
500
IC VCE
Collector to emitter saturation voltage VCE(sat) (V)
-140 IB = -1.0 mA - 0.9 mA - 0.8 mA -120 - 0.7 mA - 0.6 mA -100 -80 -60 -40 -20 Ta = 25C
-100
VCE(sat) IC
IC / IB = 10
Total power dissipation PT (mW)
400
Collector current IC (mA)
- 0.5 mA - 0.4 mA - 0.3 mA - 0.2 mA - 0.1 mA
-30
300
-10
Ta = 75C -25C
25C
200
100
-3
0 0 20 40 60 80 100 120 140 160
0
0
-2
-4
-6
-8
-10
-12
-1 -1
-3
-10
-30
-100 -300 -1 000
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Collector current IC (mA)
hFE IC
400 VCE = -10 V 10
Cob VCB
-10
f = 1 MHz Ta = 25C
IO VIN
VO = -5 V Ta = 25C
Collector output capacitance Cob (pF)
300
DC current gain hFE
Ta = 75C
Output current IO (mA)
1 -0
200
25C -25C
-3
100
0 -1
-3
-10
-30
-100 -300 -1 000
-10
-20
-30
-40
-1 -0.4
-0.8
-1.2
-1.6
-2.0
Collector current IC (mA)
Collector to base voltage VCB (V)
Input voltage VIN (V)
VIN IO
-100 VO = - 0.2 V Ta = 25C
Input voltage VIN (V)
-10
-1
- 0.1 -1
-10
-100
Output current IO (mA)
2
SJJ00226AED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of XN04110

	To Download XN04110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .