 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Power Transistors 2SA0886 (2SA886) Silicon PNP epitaxial planar type Unit: mm For low-frequency power amplification Complementary to 2SC1847 I Features * Output of 4 W can be obtained by a complementary pair with 2SC1847 * TO-126B package which requires no insulation plate for installation to the heat sink 8.0+0.5 -0.1 3.160.1 3.80.3 11.00.5 3.20.2 1.90.1 I Absolute Maximum Ratings TC = 25C Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Symbol VCBO VCEO VEBO ICP IC PC Tj Tstg Rating -50 -40 -5 -3 -1.5 1.2 *1 0.750.1 0.50.1 0.50.1 1.760.1 2.30.2 3 Unit V V V A A W C C 4.60.2 16.01.0 1 2 1: Emitter 2: Collector 3: Base TO-126B Package 5 *2 Junction temperature Storage temperature 150 -55 to +150 Note) *1: Without heat sink *2: With a 100 x 100 x 2 mm A1 heat sink I Electrical Characteristics TC = 25C Parameter Collector cutoff current Symbol ICBO ICEO Emitter cutoff current Collector to base voltage Collector to emitter voltage Forward current transfer ratio * Conditions VCB = -20 V, IE = 0 VCE = -10 V, IB = 0 VEB = -5 V, IC = 0 IC = -1 mA, IE = 0 IC = -2 mA, IB = 0 VCE = -5 V, IC = -1 A IC = -1.5 A, IB = - 0.15 A IC = -2 A, IB = - 0.2 A VCB = -5 V, IE = 0.5 A, f = 200 MHz VCB = -20 V, IE = 0, f = 1 MHz Min Typ Max -1 -100 -10 IEBO VCBO VCEO hFE VCE(sat) VBE(sat) fT Cob -50 -40 80 220 -1.0 -1.5 150 45 3.050.1 Unit A A A V V Collector to emitter saturation voltage Base to emitter saturation voltage Transition frequency Collector output capacitance Note) *: Rank classification Rank hFE Q 80 to 160 V V MHz pF R 120 to 220 Note.) The Part number in the Parenthesis shows conventional part number. 1 2SA0886 PC T a 6 Power Transistors IC VCE TC=25C IB=-40mA -35mA VCE(sat) IC Collector to emitter saturation voltage VCE(sat) (V) IC/IB=10 -10 Collector power dissipation PC (W) 5 (1)With a 100x100x2mm Al heat sink (2)Without heat sink -4.0 -3.5 Collector current IC (A) -3.0 -2.5 -30mA -25mA -20mA -3 4 (1) 3 -1 -2.0 -15mA -1.5 -1.0 -0.5 -10mA -5mA -0.3 TC=100C -0.1 25C -25C 2 (2) 1 -0.03 0 0 20 40 60 80 100 120 140 160 180 200 0 0 -2 -4 -6 -8 -10 -0.01 -0.01 -0.03 -0.1 -0.3 -1 -3 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Collector current IC (A) VBE(sat) IC Base to emitter saturation voltage VBE(sat) (V) IC/IB=10 -10 1000 hFE IC 240 VCE=-5V fT I E VCB=-5V f=200MHz TC=25C Forward current transfer ratio hFE Transition frequency fT (MHz) -3 200 TC=100C 300 -3 TC=-25C 100C -0.3 25C 25C 160 -1 100 -25C 120 30 -0.1 10 80 -0.03 3 40 -0.01 -0.01 -0.03 -0.1 -0.3 -1 -3 1 -0.01 -0.03 -0.1 -0.3 -1 0 0.01 0.03 0.1 0.3 1 3 10 Collector current IC (A) Collector current IC (A) Emitter current IE (A) Cob VCB -60 VCER RBE 1000 TC=25C ICEO Ta VCE=-12V Collector output capacitance Cob (pF) Collector to emitter voltage VCER (V) 140 120 100 80 60 40 20 0 -1 IE=0 f=1MHz TC=25C -50 300 -30 ICEO (Ta) ICEO (Ta=25C) 0.01 0.1 1 10 -40 100 30 -20 10 -10 3 -3 -10 -30 -100 0 0.001 1 0 20 40 60 80 100 120 Collector to base voltage VCB (V) Base to emitter resistance RBE (k) Ambient temperature Ta (C) 2 Power Transistors Area of safe operation (ASO) -10 -3 ICP IC Single pulse TC=25C 10000 2SA0886 Rth(t) t (1)Without heat sink (2)With a 100x100x2mm Al heat sink Collector current IC (A) -1 -0.3 -0.1 t=10ms Thermal resistance Rth(t) (C/W) 3000 1000 300 (1) 100 30 10 3 1 0.3 (2) t=1s -0.03 -0.01 -0.003 -0.001 -0.1 -0.3 -1 -3 -10 -30 -100 0.1 10-4 10-3 10-2 10-1 1 10 102 103 104 Collector to emitter voltage VCE (V) Time t (s) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 2SA0886
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |