Part Number Hot Search : 
STV2246 KSC1623 0S080H M66509 PCS240DL 2815T F7451 AM28F
Product Description
Full Text Search
 

To Download BA7666FS Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 BA7666FS
Multimedia ICs
3channel 75 driver
BA7666FS
The BA7666FS is 3channel 75 driver with 6dB amplifier and sag compensator, and available for composite Video, composite Y and so on. This driver can have two loads (75 ) and package is small (SSOPA16PIN). This input is sync-tip-clamp for all 3channnel. This has 3channel mute and power save circuits (each channel) operated for making output under 0.2v.
!Features 1) Sync-tip-clamp input 2) Low power consumption (Typ.117mW) 3) Built-in output mute circuit 4) Built-in power save circuit 5) Built-in output protection circuit 6) Can make output coupling capacitor smaller by the built-in sag correction circuit 7) Can drive two circuits by one output 8) Small package of SSOP-A16 pin
!Applications Digital audio appliances such as DVD, and STB
!Absolute maximum ratings (Ta = 25C)
Item Supply voltage Allowable loss Working temperature Storage temperature range Symbol VCC Pd Topr Tstg Rating 8 650 -25 +75 -55 +125 Unit V mW
C C
For operation above 25C free-air temperature, dissipation deratings is decreasing 6.5mW per 1C
!Recommendable operating range
Item Supply voltage range Symbol VCC Min. 4.5 Std. 5.0 Max. 5.5 Unit V
This product is not designed for protection against radioactive rays.
1/2
BA7666FS
Multimedia ICs
!Electrical characteristics (Ta = 25C, VCC = 5V unless otherwise stated)
Standard Value
Min. Circuit current Maximum ouput level Voltage gain Frequency characteristics Channel to Channel crosstalk Muting level Mute Threshold "H" Mute Threshold "L" Supply current in Mute ICC VOm Gv Gf CT MT VTHH VTHL IMT 11.7 2.6 5.5 -1.0 - - 2.5 0 - Typ. 23.4 3.0 6.0 0.0 -60 -60 - - 2.0 Max. 35.1 - 6.5 1.0 - - VCC 1.0 4.0 mA Vp-p dB dB dB dB V V mA No-signal f=1kHz,The=1% f=4.43MHz,1Vp-p f=10MHz/1MHz,Vp-p f=4.43MHz,1Vp-p f=4.43MHz,1Vp-p
Item
Synbol
Unit
Testing Conditions
!Application circuit
5V Vcc
1 16
MUTE
6dB 75
0.1F 1000F
1F
2
Composite Video
47F 75
15
75
3 14
1F
4
Composite Video 6dB 75
1000F
13
75
75
5 12
N.C. 1F
6
11 N.C.
1000F
7
6dB 75
75
10
Composite Video
75
8 9
In case using say compensator. 100F
6dB 75
75
25F
75
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0


▲Up To Search▲   

 
Price & Availability of BA7666FS

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X