 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROSPACE PC/104 486CPU-66MHz MSM486SL Features AMD ElanSC400, 3.3V, 66MHz Video: LCD (CGA, 1/4 VGA) STN 8bit DRAM: 2, 8, (16)MB (soldered) 1st Level Cache: 8kBytes SSD: DIL Socket for DOC2000 IDE (ISA): Hard Drive, Flash Floppy Disk Interface (3.5) COM1, COM2, COM3 LPT1 bi-directional LCD Character Interface Key Matrix Scanner RTC with Back-up Li-Battery Watchdog with Power Failure Detection Power Management (Suspend) Form Factor: PC/104 BUS PC/104 EEPROM for Setup Values Operating Temperature: -25C to +70C Extend. Temp.: -40C to +85C (33MHz) available Description The low power, low cost 486 CPU MSM486SL integrates all functions of a standard PC on one board, except CRT, though a STN flat panel (monochrome) can be connected the adjustable LCD-BIAS voltage generator is onboard. Most remarkable is its low power consumption (5V only) and wide operating temperature range no cooling needed. Power management and a programmable watchdog timer are standard. The operating system and the application program can be booted from floppy disk, hard disk, or an optional SSD (DOC) with up to 144MB flash memory, which can be programmed on-board. In addition, an IDE flash disk 16MB (no FFS needed) can be connected to the IDE port and directly mounted onto the board. Besides a AT/PS2 keyboard controller, a key matrix scanner (8 x 16) is on-board. The CPU runs on operating systems such as MS-DOS, Windows, Windows NT, Windows CE (min. DRAM 8MB), and real time systems such as QNX or Linux, to name a few. Min. quantities of 50 units per order are required for extended temperature range and coating. Ordering Information Item codes MSM486SL2 MSM486SL8 MSM486SL16 MSM486SVPC Part # 801102 801108 801116 Desription 486 CPU, 2MB DRAM, CGA-1/4VGA, no CRT/LCD 486 CPU, 8MB DRAM, CGA-1/4VGA, no CRT/LCD 486 CPU, 16MB DRAM, CGA-1/4VGA, no CRT/LCD Options Solid State Flash Disk (32 pin DIL) - DiskOnChip MD-2800-D08 MD-2202-D16 MD-2200-D24 MD-2202-D32 MD-2202-D48 MD-2202-D72 MD-2202-D96 MD-2203-D144 MD-2203-D192 MD-2203-D224 MD-2203-D288 MSFLASH16 MSFLASH32 MSFLASH64 801088 Board mounted, dual slot PCMCIA adapter DiskOnChip Millenium, 8MB DiskOnChip 2000, 16MB DiskOnChip 2000, 24MB DiskOnChip 2000, 32MB DiskOnChip 2000, 48MB DiskOnChip 2000, 72MB DiskOnChip 2000, 96MB DiskOnChip 2000, 144MB DiskOnChip 2000, 192MB DiskOnChip 2000, 224MB DiskOnChip 2000, 288MB IDE Flash Modules Cables 080509 808532 808564 802605 IDE Flash Disk 16MB (2" x 1.2" x 0.5") IDE Flash Disk 32MB (2" x 1.2" x 0.5") IDE Flash Disk 64MB (2" x 1.2" x 0.5") Cable kit, including cable for 1.8"/2.5" Hard Drive MSM-CK MSM486SL Technical Specifications Features General CPU Clock Frequency Math. Co-processor DRAM Solid State Disk DMA/IRQ Available Cache (Level 1) Counters/Timers Zero Wait State Signal Watchdog Timer Setup Saves BUS System Video Controller Mode Resolution Video Memory Bias-Voltage LCD LCD-Character Interface Hard Disk Controller Floppy Disk Controller Serial Ports Parallel Port Keyboard Controller KB-Matrix Controller Mouse Power Requirement Power Management RTC Back-up Battery Dimensions Weight MTBF Functions AMD ElanSC400 66MHz none 2, 8, (16) MB 32-pin DIL-Socket for DOC 1 DMA (8bit); 2 IRQ (programmable) 8kB Write-back 3 programmable not available Enable/disable (softw.); power fail indication EEPROM 2kB (1kB for user) PC/104 CGA, 1/4 VGA (monochrome) Flat Panel, 8bit STN 320 x 240 monochrome UMA On-board (-18V to -30V) 8 bit (bi-directional) IDE, AT-Type (1.3/1.8/2.5 Hard Disk) 3.5, micro floppy COM1: RS485 COM2/3: RS232C LPT1 (SPP, EPP bi-directional) AT or PS2 8 x 16 keys PS/2 5V/510mA (typical) Suspend: 5V/350mA Lithium 220mAh on-board 3.8 x 3.6 x 0.5 (96x90x11mm) 2.3 oz. (65g) 200,000 hours -25C to 70C -40C to +85C (33MHz) available -55C to +85C 5 - 90% non-condensing 5 to 2000Hz 10 G Remarks Options no floating point soldered 2 to 144MB customer no 2nd Level Strobe 800ms 104 pins 5V or 3.3V adjustable 44 pins (RM2) 26 pins (FCC) 2 pins 10 pins 1x26 pins 33MHz (selectable) PC-Interfaces 640 x 200 mono IDE Flash 16MB Adapt. for reg. floppy Electrical Physical Characteristics 2MB 2MB Approx. 5 years from Surface external Operating Environment Operating Temperature Extended Temperature Storage Temperature Relative Humidity Vibration Shock Burn-in; no cooling min. qty. Manufacturer DIGITAL-LOGIC AG Nordstrasse 4/F CH-4708 Luterbach Switzerland USA Distributor & Support Center Advanced Digital Logic, Inc. 4411 Morena Blvd., Suite 230 San Diego, CA 92117-4328 P: 858.490.0597 F: 858.490.0599 Email: sales@adlogic-pc104.com http://www.adlogic-pc104.com Representative MSM486SL rev11/01 |
Price & Availability of MSM486SL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |