| PART |
Description |
Maker |
| P-17E-1657-37 |
terminate the cable wires to the connector
|
Amphenol Corporation
|
| 0690187040 |
This fixture is used to terminate 90075 8/6 and 8/8 Way connectors onto pre-cut and stripped cable
|
Molex Electronics Ltd.
|
| 2880192 |
Protection of all eight signal wires of the data cable
|
PHOENIX CONTACT
|
| 2880150 |
Protection of all eight signal wires of the data cable
|
PHOENIX CONTACT
|
| 74ABT162827A |
20 The buffer of a little/ line driver, turn over not, by 30 terminate the electric resistance(3- state)
|
Philips
|
| 69020-0770 |
This fixture will terminate Molex Product 7660,7664,7674 and 7675.
|
Molex Electronics Ltd.
|
| HDEM00250 HDEM00350 HDEM00384 HDEM00450 HDEM00484 |
7/8, receptacle, with wires, frontal assembling
|
SHIELD s.r.l.
|
| SS-741010C5-RN-NF |
HIGH PERFORMANCE UNSHIELDED LED JACK WITH FORWARD FACING WIRES IN POSITIONS 4 & 6 (-RN) DESIGNATES LED COLOR 10 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK HIGH PERFORMANCE UNSHIELDED LED JACK WITH FORWARD FACING WIRES IN POSITIONS 4 & 6 (-RN) DESIGNATES LED COLOR
|
Bel Fuse, Inc. BEL[Bel Fuse Inc.]
|
| SD-87280-0400 0872800400 |
2.00mm (.079) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 4 Circuits
|
Molex Electronics Ltd.
|
| 0872800200 |
2.00mm (.079") Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 2 Circuits
|
Molex Electronics Ltd.
|
| SRCABLETRAY |
SmartRack Roof-Mounted Cable Trough - Provides cable routing and power/data cable segregation
|
Tripp Lite. All Rights ...
|