| PART |
Description |
Maker |
| 88753-8600 0887538600 |
USB On-The-Go (OTG) Shielded I/O Cable Assembly, Mini A-to-Mini B, USB 2.0, 2.0m (6.56) Length, White
|
Molex Electronics Ltd.
|
| 88753-8302 0887538302 |
USB On-The-Go (OTG) Shielded I/O Cable Assembly, Mini A-to-Mini B, USB 2.0, 1.2m Length, Black
|
Molex Electronics Ltd.
|
| 0887328612 |
USB On-The-Go (OTG) Shielded I/O Cable Assembly, USB A-to-Mini B, USB 1.1, 1.0m (3.28) Length, Black
|
Molex Electronics Ltd.
|
| 0887328602 |
USB On-The-Go (OTG) Shielded I/O Cable Assembly, USB A-to-Mini B, USB 2.0, 1.0m (3.28) Length, Black
|
Molex Electronics Ltd.
|
| 54819-1572 0548191572 |
USB On-The-Go (OTG) Mini-B Receptacle, Right Angle, SMT Solder Tails and ShellTabs, with Cover Tape, Lead-free, LCP Housing
|
Molex Electronics Ltd.
|
| 0675032020 67503-2020 |
0.80mm (.031") Pitch, USB On-The-Go (OTG) Mini-B Receptacle, Surface Mount, Right Angle, Solder Tabs with Back Cover and PCB Locator Plastic 1.00mm (.039") Pegs
0.80mm (.031) Pitch, USB On-The-Go (OTG) Mini-B Receptacle, Surface Mount, Right Angle, Solder Tabs with Back Cover and PCB Locator Plastic 1.00mm (.039) PegsLead Free,
|
Molex Electronics Ltd.
|
| FUSB2805MLX |
USB2.0 High-Speed OTG Transceiver with ULPI Interface
|
Fairchild Semiconductor
|
| IP4059CX5 |
Integrated USB 2.0 and USB OTG ESD protection to IEC 61000-4-2 level 4
|
NXP Semiconductors
|
| 17K1A139 |
IP67 mini USB Receptacle Dust Cap Assembly kit with mini USB Type B Through Hole Version
|
CONEC Elektronische Bauelemente GmbH
|
| CY7C67200-48BAI CY3663 |
Universal Serial Bus : USB Embedded Hosts
EZ-OTG programmable USB on-the-go host/peripheral controller. Development kit.
|
Cypress
|
| SMB137C |
Programmable Switching Li Battery Charger with USB/AC Input, CurrentPath Manager,TurboChargeTM Mode, Low Battery Recovery, AICLand USB OTG/HDMI/MHL Support
|
Summit Microelectronics, Inc.
|
|
