| PART |
Description |
Maker |
| PE5011-1 |
PRESET TORQUE WRENCH USE FOR SMA, 2,9mm AND 3,5mm 8 IN LBS HEX SIZE 5/16
|
Pasternack Enterprises, Inc.
|
| PE5011-4 |
PRESET TORQUE WRENCH USE FIR TNC(HEX NUT), 14 IN LBS, HEX SIZ 5/8
|
Pasternack Enterprises, Inc.
|
| PW-82520R0NEW PW-82520R0-120 |
Controllers. Torque Loop|3-Phase Torque Controller. Small Plug In Hybrid
BRUSHLESS DC MOTOR CONTROLLER, 20 A, DMA43 HYBRID, FP-43
|
Data Device, Corp.
|
| 037N0045 037N0046 037N0065 037N0040 037N0009 037N0 |
TCI 15 STARTING TORQUE LIMITER
TCI 25 STARTING TORQUE LIMITER
CONTACTOR SS 1 PHASE DC 接触器不锈钢1相DC
MCI 25 MOTOR CONTROLLER MCI公司25电机控制
ACI30-1 ANALOGUE CONTROLLER
|
Honeywell International, Inc.
Air Cost Control
TE Connectivity, Ltd.
|
| TG60-11 TG60-13 TG60-15 TG60-17 TG60-19 TG60-21 TG |
Connector Wrench
|
Glenair, Inc.
|
| TG39-20 TG39-10 TG39-12 TG39-14 TG39-16 TG39-18 TG |
Connector Wrench
|
Glenair, Inc.
|
| TG90-09A TG90-09B TG90-09C TG90-09D TG90-09E TG90- |
Connector Wrench
|
Glenair, Inc.
|
| STG3699 STG3699QTR STG3699TTR |
LOW VOLTAGE 0.5 OHM MAX QUAD SPD SWITCH WITH BREAK BEFORE MAKE FEATURE
LOW VOLTAGE 0.5 MAX QUAD SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE
LOW VOLTAGE 0.5з MAX QUAD SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE
LOW VOLTAGE 0.5?/a> MAX QUAD SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| PHT-30D PHT-10D PHT-5D PHT-1.2D PHT-2.5D PHT-70D |
PM Hysteresis Torque Controller
|
List of Unclassifed Manufacturers
List of Unclassifed Manufac...
List of Unclassifed Man...
|
| VCSH0.6 VCSH1.2 VCEH0.6 VCEH2.5 |
EM Clutch (high torque design)
|
List of Unclassifed Manufac...
List of Unclassifed Man...
|
