| PART |
Description |
Maker |
| P1BS |
For suggested pad layout, see drawing: PAD-01
|
All Sensors Corporation
|
| ZTT-MT-20.000 ZTT-MX-20.000 ZTT-MG-20.000 ZTA ZTA- |
2 Pad and 3 Pad Ceramic Package, 5.5 mm x 10 mm
|
ILSI America LLC
|
| ZTACV-MX ZTTCV-MX |
2 Pad and 3 Pad Ceramic Package, 3.1 mm x 3.7 mm
|
ILSI America LLC
|
| CPSM-5 CPSM CPSM-3 |
Commercial Power, Fireproof Inorganic Construction, High Wattage Capabilities, Low Board Temperatures, Suitable for Pick and Place Equipment, Meets or Exceeds EIA RS-344 Spec, High Thermal Conductivity and Humidity Resistance
Wirewound Resistors, Commercial Power, Surface Mount
|
VISAY[Vishay Siliconix]
|
| STP3NA100 STP3NA100FP |
OLD PRODUCT: NOT SUITABLE FOR NEW DESIGN-IN
OLD PRODUCT: NOT SUITABLE FOR NEW DESIGN-IN 老产品：不适合用于新设计中
N - CHANNEL ENHANCEMENT MODE FAST POWER MOS TRANSISTOR
|
ST Microelectronics
|
| KD3004-DC70A KD3003-DF10A |
Thick film thermal printhead (with thermal historical control)
Compact high speed thick film thermal printhead (12 dots / mm)
|
ROHM[Rohm]
|
| NE2004VA10A A5800562 NE2004-VA10A |
Near edge thin film thermal printhead (8 dots / mm)
From old datasheet system
Near edge thin film thermal printhead (8 dot/mm)
Thermal Printheads > Fro Plastic Card > NE200*-, 300*-VA@ Series
|
Rohm CO.,LTD.
ROHM[Rohm]
|
| KF2008-GK11A |
Thick Film Thermal Printhead (8dots / mm)
Thermal Printheads > For POS, LABEL > KF200*-GK Series
|
Rohm CO.,LTD.
ROHM[Rohm]
|
| B12A12005L310100U253 |
Thermal motor protector Temperature limiter Thermal cut-out
|
List of Unclassifed Manufacturers
ETC
|
| KF3003-GM50A |
Thick film thermal printhead (with thermal historical control)
|
Rohm
|
| SE2004-DC70A |
High speed thermal printhead (with thermal historical control)
|
ROHM[Rohm]
|
