| PART |
Description |
Maker |
| E-1071-627-DC24V-3.1A E-1071-623-DC24V-3.1A |
Designed for inductive loads (DC 24 V)
|
ETAL Group
|
| AN307 |
USE OF TRIACS ON INDUCTIVE LOADS
|
SGS Thomson Microelectronics
|
| BTS612N1 BTS612N1-13 |
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
| RE030 |
1.75V to 2.1V. rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated with other analog cells
RE030 is a dual mode Low Drop Out (LDO) voltage regulator macrocell with programmable output voltage ranging from 1.75V to 2.1V, rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated wi
|
Atmel
|
| BTS410F2 BTS410F2-13 |
Fast demagnetization of inductive loads
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
| L9825 |
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL,OUTPUT PROTECTION AND DIAGNOSTIC
Octal Low-side Driver For Resistive and Inductive Loads With Serial / Parallel Input Control, Output Protection and Diagnostic
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL,OUTPUT PROTECTION AND DIAGNOSTIC
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
意法半导
|
| E-L9826TR |
Octal Low-Side Driver for Resistive and Inductive Loads With Serial/Parallel lnput Control Output Protection and Diagnostic
|
ST Microelectronics
|
| BTS630 |
From old datasheet system
PWM Power Unit (The device allows continuous power control for lamps,LEDs or inductive loads.)
|
SIEMENS[Siemens Semiconductor Group]
|
| ATH15 ATH12 ATH06 ATH06T033 |
CHOKE,AXIAL,CONFORMAL,0.68uH, 10% INDUCTIVE TOL,495 IDC,
CHOKE,AXIAL,CONFORMAL,8.2uH, 5% INDUCTIVE TOL,155 IDC,
CHOKE,AXIAL,CONFORMAL,47uH, 10% INDUCTIVE TOL,167 IDC,
CHOKE,AXIAL,CONFORMAL,470uH, 5% INDUCTIVE TOL,53 IDC,
|
Astec America, Inc
|
| REC-14LH REC-16LH |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Unsealed, Designed for High Pressure Chamber of Cylinders, High Accuracy, Very Good Repeatability
|
Vishay
|
| IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|
| JDS9-1Y DS9-1W |
AC solid state relay for loads up to 1A @ 250Vrms (2A with heatsink)
|
Tyco Electronics
|
