| PART |
Description |
Maker |
| NCP45521 NCP45520IMNTWGH NCP45521IMNTWGH NCP45520I |
ecoSWITCH Advanced Load Management Controlled Load Switch with Low RON
ecoSWITCH Advanced Load Management
|
ON Semiconductor
|
| AQZ202V AQZ204V AQZ205V AQZ207V |
Power photoMOS relay with internal varistor. AC/DC type. Output rating: load voltage 60 V AC, 85 V DC, load current 1.0 A.
Power photoMOS relay with internal varistor. AC/DC type. Output rating: load voltage 30 V AC, 38 V DC, load current 2.0 A.
Power photoMOS relay with internal varistor. AC/DC type. Output rating: load voltage 140 V AC, 180 V DC, load current 0.5 A.
Power photoMOS relay with internal varistor. AC/DC type. Output rating: load voltage 17 V AC, 22 V DC, load current 3.0 A.
POWER PhotoMOS RELAYS with Internal Varistor 功率PhotoMOS继电器的内部电阻
|
Matsushita Electric Works(Nais)
Nais(Matsushita Electric Works)
Nais(Matsushita Electric Wo...
|
| AQV414AX |
PhotoMOS relay, GU (general use) type [1-channel (form B) type]. AC/DC type. I/O isolation: 1.500 V AC. Output rating: load voltage 400 V, load current 120 mA. Surface-mount terminal, tape and reel packing style, picked from the 1/2/3-pin
|
Matsushita Electric Works(Nais)
|
| NCP4543 |
NCP4543 Datasheet - ecoSWITCH™ Advanced Load Management: 7.3A Integrated Load Switch w/ Low R<sub>ON</sub>, V<sub>IN</sub> Range= 0.5V-6V, Adj. Slew Rate, Adj. Discharge, Adj. Turn-On Delay
|
ON Semiconductor
|
| AD53032 AD53032JSTP |
Silver Mica Capacitor; Capacitance:12pF; Capacitance Tolerance: /- 5%; Series:CD17; Voltage Rating:500VDC; Capacitor Dielectric Material:Mica; Termination:Radial Leaded; Lead Pitch:5.9mm; Leaded Process Compatible:Yes RoHS Compliant: Yes
High Performance Driver/Comparator Active Load on a Single Chip
DRIVER/COMPARATOR/LOAD: A Single Chip that Performs the Pin Electronics Functions of Driver, Comparator and Active Load in ATE VLSI and Memory Testers
|
Analog Devices, Inc.
AD[Analog Devices]
|
| AAT4670IKS-B1 AAT4670IHS-T1 AAT4670IHS-B1 AAT4670I |
Low-Cost Molded VRS Sensor, 6,4 mm [0.250 in]
Dual-Input Dual-Output Load Switches
Dual-Input/ Dual-Output Load Switches
Dual-Input, Dual-Output Load Switches
|
Advanced Analogic Technologies, Inc.
ANALOGICTECH[Advanced Analogic Technologies]
|
| WE300M WE400M WE320M WE300 WE301 WE301M WE320 |
DC/DC converter, 20 watts. Input voltage 18-36 VDC. Output voltage 2.5 VDC. Output current 5000 mA. Input current 30 mA(no load), 645 mA(full load).
DC/DC converter, 20 watts. Input voltage 18-36 VDC. Output voltage 5 VDC. Output current 4000 mA. Input current 20 mA(no load), 992 mA(full load).
DC/DC converter, 20 watts. Input voltage 18-36 VDC. Output voltage 3.3 VDC. Output current 5000 mA. Input current 20 mA(no load), 828 mA(full load).
DC to DC Converter
|
International Power Sources
|
| BYT52A BYT52M BYT52 BYT52B BYT52D BYT52G BYT52J BY |
INNOLINE: RP75-xxxxSB - Single Outputs up to 25A; Input/Output 1.6kVDC Isolation; Adjustable Output Voltage; No Minimum Load; Under -Voltage Lockout
- Adjustable Output Voltage, Independently Regulated Outputs- No Minimum Load- Industry Standard Footprint- Halt Tested- Compact 61.0 x
INNOLINE: RP75-S_DI - Single Output up to 20A Dual Outputs Total Current up to 15A up to 100% Load Imblance- Input/Output 1.6kVDC Isolation
Fast Silicon Mesa Rectifiers
From old datasheet system
|
Vishay Intertechnology,Inc.
Vishay Telefunken
Vishay Siliconix
|
| MAX3430 MAX3430CPA MAX3430CSA MAX3430EPA MAX3430ES |
/-80 V fault-protected, fail-safe, 1/4-unit load, 3.3 V,RS-485 transceiver
80V Fault-Protected / Fail-Safe / 1/4-Unit Load / #.3V RS-485 Transceiver
±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, 3.3V RS-485 Transceiver
【80V Fault-Protected, Fail-Safe, 1/4-Unit Load, 3.3V RS-485 Transceiver
" /-80V Fault-Protected, 3.3 V Single supply, Fail Safe, 1/4-Unit load, RS-485 Tranceiver."
80V Fault-Protected, Fail-Safe, 1/4-Unit Load, #.3V RS-485 Transceiver
±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, 3.3V RS-485 Transceiver
±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, 3.3V RS-485 Transceiver
??0V Fault-Protected, Fail-Safe, 1/4-Unit Load, #.3V RS-485 Transceiver
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
MAXIM INTEGRATED PRODUCTS INC
|
| PS7112-1A PS7112L PS7112L-1A PS7112L-1A-E3 PS7112L |
6-PIN DIP, 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET 6引脚DIP00毫安的连续负载电1通道光学耦合场效应晶体管
Coaxial Cable; Coaxial RG/U Type:174; Impedance:50ohm; Conductor Size AWG:26; No. Strands x Strand Size:7 x 34; Jacket Material:Polyvinylchloride (PVC); Leaded Process Compatible:Yes; Voltage Nom.:300V RoHS Compliant: Yes
Solid State Relay(固态继电器)
6-PIN DIP / 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
6-PIN DIP 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
| AQV217SX AQV217SZ AQV215SX AQV215SZ AQV216SZ AQV21 |
PhotoMOS relay, GU (general use) type [1-channel (form A ) type]. Output rating: load voltage 600 V, load current 40 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) type [1-channel (form A ) type]. Output rating: load voltage 400 V, load current 100 mA. Tape and reel packing style, picked from the 4/5/6-pin side.
GU (General Use) Type SOP Series [1-Channel (Form A) Type]
PhotoMOS relay, GU (general use) type [1-channel (form A ) type]. Output rating: load voltage 60V, load current 350 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) type [1-channel (form A ) type]. Output rating: load voltage 350 V, load current 120 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) type [1-channel (form A ) type]. Output rating: load voltage 350 V, load current 120 mA. Tape and reel packing style, picked from the 4/5/6-pin side.
PhotoMOS relay, GU (general use) type [1-channel (form A ) type]. Output rating: load voltage 400 V, load current 100 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
|
NAIS[Nais(Matsushita Electric Works)]
Matsushita Electric Works(Nais)
|
| AQV210EAX AQV210EHAX AQV214EAX |
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: standard 1,500 VAC. Output rating: load voltage 350V, load current 130 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: reinforced 5,000 VAC. Output rating: load voltage 350V, load current 130 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: standard 1,500 VAC. Output rating: load voltage 400V, load current 120 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
|
Matsushita Electric Works(Nais)
|
