| PART |
Description |
Maker |
| L9826TR |
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL, OUTPUT PROTECTION AND DIAGNOSTIC
|
ST Microelectronics
|
| L982503 L9825TR |
Octal Low-side Driver For Resistive and Inductive Loads With Serial / Parallel Input Control, Output Protection and Diagnostic
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL,OUTPUT PROTECTION AND DIAGNOSTIC
Octal Low-side Driver For Resistive and Inductive Loads With Serial / Parallel Input Control, Output Protection and Diagnostic
|
STMicroelectronics
ST Microelectronics
|
| BTS730 Q67060-S7007-A2 Q67060-S7007A2 |
PWM Power Unit (The device allows continuous power control for lamps/LEDs or inductive loads.)
TRANSISTOR SMD PROFET LESITUNGS MOSFET
PWM Power Unit (The device allows continuous power control for lamps,LEDs or inductive loads.)
From old datasheet system
|
SIEMENS AG
SIEMENS[Siemens Semiconductor Group]
|
| E-L9823 E-L9823013TR L9823 |
Octal low-side driver for bulb, resistive and inductive loads with serial input control, output protection and diagnostic
|
STMicroelectronics
ST Microelectronics
|
| A4957 |
The A4957 is a full-bridge controller for use with external N-channel power MOSFETs and is specifically designed for applications with high-power inductive loads such as brush DC motors.
|
Allegro MicroSystems
|
| BTS555 |
From old datasheet system
Smart Highside High Current Power Switch (Overload protection Current limitation Short circuit protection Overtemperature protection)
|
SIEMENS AG
Siemens Semiconductor Group
|
| RE023 |
RE023 [Updated 2/03. 9 Pages] The RE023 is a Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.6V output voltage. rated for loads of up
Embedded ASIC Macrocell: Power Management for Mobile Terminals (PM), RE023 Fixed 2.6V 160 mA LDO Voltage Regulator
A Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.6V output voltage, rated for loads of up to 160 mA. A typical application is radio section supply in mobile terminals.
|
ATMEL[ATMEL Corporation]
|
| BTS542E2 |
Smart Highside Power Switch (Overload protection Current limitation Short-circuit protection Thermal shutdown)
|
Siemens Semiconductor Group
|
| NE57600 NE57600HD NE57600FD NE57600YD NE57600BD NE |
One-cell Lithium-ion battery protection with over/undercharge and overcurrent protection 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
|
Optoway Technology, Inc.
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
| BTS612N1 |
Smart Two Channel Highside Power Switch (Overload protection Current limitation Short circuit protection Thermal shutdown)
|
Siemens Semiconductor G...
|
| NE57607GDH NE57607_1 NE57607YDH NE57607 NE57607C N |
Two-cell Lithium-ion battery protection with overcurrent, over- and under-voltage protection 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
Two-cell Lithium-ion battery protection with overcurrent over- and under-voltage protection
From old datasheet system
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| RE024 |
RE024 [Updated 2/03. 11 Pages] A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.8V output voltage. rated for loads of up
A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.8V output voltage, rated for loads of up to 160 mA and as low as 5 mA. A typical application is radio section supply in mobile terminals.
|
Atmel
|
