| PART |
Description |
Maker |
| V23990-P824-F-P2-19 |
Typical average static loss as a function of output current
|
Vincotech
|
| RJ11-XLCX-X RJ11-XXXX |
TYPICAL INSERTION LOSS IN DB LINE-TO-GROUND (STOP BAND) IN A 50 OHM CIRCUIT
|
CII Technology
|
| HMC787A |
Conversion loss: 9 dB typical at 3 GHz to 9 GHz
|
Analog Devices
|
| UPD4265400G5-A50 UPD4265400G5-A60 UPD4265400G5-A70 |
2M x 8 Static RAM
256K x 4 Static RAM x4快速页面模式的DRAM
512K x 32 Static RAM x4快速页面模式的DRAM
3.3V 16K/32K x 36 FLEx36™ Synchronous Dual-Port Static RAM x4快速页面模式的DRAM
x4 Fast Page Mode DRAM x4快速页面模式的DRAM
512K x 24 Static RAM x4快速页面模式的DRAM
2-Mbit (128K x 16) Static RAM x4快速页面模式的DRAM
128K x 8 Static RAM 128K的8静态RAM
x4FastPageModeDRAM
|
Elpida Memory, Inc.
EPCOS AG
STMicroelectronics N.V.
NEC, Corp.
|
| KTS1C1S250 |
Typical RDS(on) (N-Channel)=0.9 Typical RDS(on) (N-Channel)=2.1 Gate-source zener diode
|
TY Semiconductor Co., Ltd
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| C781PN C781 C781L C781LA C781PB C781PD C781PM |
Phase Control SCR 2500 Amperes Average 2100 Volts 4820 A, 1200 V, SCR
Phase Control SCR 2500 Amperes Average 2100 Volts 相位控制晶闸管二五○○安培平100伏特
Phase Control SCR 2500 Amperes Average 1600-2100 Volts
|
Powerex, Inc.
POWEREX[Powerex Power Semiconductors]
Powerex Power Semicondu...
|
| MCP606-I/P MCP606-I/SN MCP606-I/ST MCP609-I/P MCP6 |
The MCP606 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ...
The MCP609 quad operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ...
The MCP608 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ...
The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ...
2.5V TO 5.5V MICROPOWER CMOS OP AMPS
|
Microchip Technology Inc.
|
| MCP6021 MCP6024 MCP6022 MCP6024T-I_ST MCP6021-E_P |
The MCP6022 dual operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 ...
The MCP6021 operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 mA ...
The MCP6024 quad operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 ...
The MCP6023 operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 mA ...
Rail-to-Rail Input/Output 10 MHz Op Amps
Rail-to-Rail Input/Output, 10 MHz Op Amps
|
MICROCHIP[Microchip Technology]
|
| PK516 |
Average Weight: 1.9400 g
|
Xilinx, Inc
|
