| PART |
Description |
Maker |
| SI5350C-B |
FACTORY-PROGRAMMABLE ANY-FREQUENCY CMOS CLOCK GENERATOR
|
Silicon Laboratories
|
| CY22388ZXC-XXX CY22389ZXC-XXX CY22391 CY22391LFXC- |
Factory Programmable Quad PLL Clock Generator with VCXO
|
Cypress Semiconductor
|
| CY22391LFXC-XXX CY22389ZXC-XXX CY22388ZXC-XXX |
Factory Programmable Quad PLL Clock Generator with VCXO 166 MHz, OTHER CLOCK GENERATOR, PDSO20
Factory Programmable Quad PLL Clock Generator with VCXO 166 MHz, OTHER CLOCK GENERATOR, PDSO16
|
Cypress Semiconductor Corp.
Cypress Semiconductor, Corp.
|
| TC6502 TC6504P005VCT TC6501 TC6501P115VCT TC6501P1 |
The TC6501 through TC6504 are SOT-23 temperature switches that require no external components and the design is facilitated with factory programmed temperature thresholds. A choice of factory-trimmed temperature trip points are available.
From old datasheet system
(TC6501 - TC6504) Ultra Small Temperature Switches with Pin Selectable Hysteresis
Ultra Small Temperature Switches with Pin Selectable Hysteresis 超小型温度开关，引脚可选择迟滞
|
MICROCHIP[Microchip Technology]
Microchip Technology, Inc.
|
| ADIS16490 ADIS16490BMLZ |
Factory calibrated sensitivity
|
Analog Devices
|
| A1182 A1182LUA A1180 A1184 A1181 A1182ELH A1182EUA |
(A1180 - A1184) Unipolar Hall-Effect Switch
Two-Wire Programmable Chopper-Stabilized Unipolar Hall-Effect Switch
Two-Wire, Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch
Two-Wire, Factory-Programmed, Chopper-Stabilized, Unipolar Hall-Effect Switch
|
Allegro MicroSystems, Inc.
ALLEGRO[Allegro MicroSystems]
|
| R191-200-100 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R190-110-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R191-092-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R190-172-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R190-170-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
