| PART |
Description |
Maker |
| IPD230N06NG IPD230N06NG08 |
OptiMOS庐 Power-Transistor Features For dc/dc converters and sync. rectification
OptiMOS? Power-Transistor Features For dc/dc converters and sync. rectification
30 A, 60 V, 0.023 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-252AA
|
Infineon Technologies AG
|
| AMIS30623C6239G AMIS30623C623ARG AMIS30623C623BRG |
Stepper Motor Driver and Controller with LIN Bus, Micro-stepping Features and Stall Detection; Package: SOIC-20 Wide Body; No of Pins: 20; Container: Rail; Qty per Container: 38 STEPPER MOTOR CONTROLLER, 0.8 A, PDSO20
Stepper Motor Driver and Controller with LIN Bus, Micro-stepping Features and Stall Detection STEPPER MOTOR CONTROLLER, 0.8 A, QCC32
Stepper Motor Driver and Controller with LIN Bus, Micro-stepping Features and Stall Detection - Automotive Version STEPPER MOTOR CONTROLLER, 0.8 A, QCC32
|
TE Connectivity, Ltd.
ON Semiconductor
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| QL85F6SA |
FEATURES
|
Roithner LaserTechnik G...
|
| SPSGRF |
RF features
|
STMicroelectronics
|
| R0.25S-053.3 R0.25S-0515 R0.25S-0505 R0.25S-0509 R |
Features
|
Recom International Power
|
| 9DBV0241 |
SMBus-selectable features
|
Integrated Device Techn...
|
| W956K6HB |
Low-power features
|
Winbond
|
| EV-VND7140AJ |
General device features
|
STMicroelectronics
|
| D38999 |
Features and Application Series III
|
List of Unclassifed Manufac...
|
| 59105-1-S-00-0 59105-2-S-00-0 59105-2-T-00-0 59105 |
Terminal Flange Features and Benefits
|
HAMLIN Position and Movement Sensor Solutions
|
| 59160-1-S-00-A 59160-1-S-A 59160-1-S-B 59160-1-S-C |
Surface Mount Features and Benefits
|
HAMLIN Position and Movement Sensor Solutions
|
