| PART |
Description |
Maker |
| C1310 C131007 |
Typical Applications
|
Vectron International, Inc
|
| C4650A1 C4650 C465005 |
TYPICAL APPLICATIONS
BASE STATIONS TEST EQUIPMENT SYNTHESIZERS DIGITAL SWITCHING
|
VECTRON[Vectron International, Inc]
|
| KTS1C1S250 |
Typical RDS(on) (N-Channel)=0.9 Typical RDS(on) (N-Channel)=2.1 Gate-source zener diode
|
TY Semiconductor Co., Ltd
|
| BT151-650R BT151-500R |
Typical applications include motor control
|
DIYI Electronic Technol...
|
| TL802A-1 TL801 |
TYPICAL INSTALLATION DIAGRAM
TYPICAL INSTALLATIION DIAGRAM
|
List of Unclassifed Manufacturers
List of Unclassifed Manufac...
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| TPCP8103-H09 TPCP8103-H |
High Efficiency DC-DC Converter Applications Notebook PC Applications Portable Equipment Applications CCFL Inverter Applications
|
Toshiba Semiconductor
|
| 2SJ106 |
Field Effect Transistor Silicon P Channel Junction Type Audio Frequency Amplifier Applications Analog Switch Applications Constant Current Applications Impedance Converter Applications
|
TOSHIBA
|
| 3B-850A |
TYPICAL OPERATIONG CONDITIONS
|
http://
|
| CP576 |
TYPICAL ELECTRICAL CHARACTERISTICS
|
Central Semiconductor C...
Central Semiconductor Corp.
|
