| PART |
Description |
Maker |
| PTZTE2515B |
Small power mold type. (PMDS)
|
Rohm
|
| PTZTE2518B |
Small power mold type. (PMDS), High ESD tolerance
|
Rohm
|
| NNCD5.6LH NNCD6.2LH NNCD6.8LH |
2 W, UNIDIRECTIONAL, 4 ELEMENT, SILICON, TVS DIODE
LOW CAPACITANCE TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES QUARTO TYPE: COMMON ANODE 5-PIN SUPER SMALL MINI MOLD 低电容式静电放电噪声裁剪二极管季刊类型：共阳引脚超小微型模具
|
NEC, Corp.
NEC Corp.
|
| SI8050 SI8050S SI-8050S SI-8033 SI-8033S SI-8090S |
Full-Mold, Separate Excitation Switching Type 3 A SWITCHING REGULATOR, 60 kHz SWITCHING FREQ-MAX, PZFM5
Full-Mold/ Separate Excitation Switching Type
Power Supply Miscellaneous
|
SANKEN ELECTRIC CO LTD
Sanken Electric Co., Ltd.
Sanken Electric Co.,Ltd.
Allegro
|
| 5P6SMA 5P4SMA |
5A mold isolated SCR
From old datasheet system
P gate all Diffused mold type Thyristor granted 5 A on-state Average current, with rated Voltages up to 600V
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| PS21312 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| PS21961-AT PS21961-CT PS21961-T PS21961-TW |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21205 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| NNCD68PL NNCD6.8PL |
5-PIN SUPER SMALL MINI MOLD FLAT LEAD TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE QUAD TYPE: COMMON ANODE 5针超小微型模具扁平引线式静电放电二极管噪声裁剪四型：共阳
ESD noise clipping diode 5pin XSOF(flat-lead type)
|
NEC, Corp.
NEC[NEC]
|
| NNCD6.8RL |
ESD noise clipping diode 5-pin XSOF (flat lead type) low capactance
5-PIN SUPER SMALL MINI MOLD (FLAT LEAD TYPE) ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE (QUAD TYPE: COMMON ANODE) 5针超小微型模具（扁平引脚型）静电放电噪声裁剪二极管（四型：共阳极
|
NEC[NEC]
NEC Corp.
NEC, Corp.
|
| 03P4J |
(03PxJ) ALL DIFFUSED TYPE SCR POWER MINI MOLD
|
NEC
|
