| PART |
Description |
Maker |
| L293DD013TR L293D L293DD L293D03 L293B-03 L293D-03 |
PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMICROELECTRONICS[STMicroelectronics]
ST Microelectronics
|
| ARF476FL |
RF POWER MOSFET N-CHANNEL PUSH - PULL PAIR
|
Microsemi Corporation
|
| ARF475FL |
RF POWER MOSFET N-CHANNEL PUSH - PULL PAIR
|
Microsemi Corporation
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| LTC1450CN LTC1450LCN LTC1450CG |
Parallel Input, 12-Bit Rail-to-Rail Micropower DACs in SSOP
Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-TSSOP 0 to 70
Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-SOIC 0 to 70 PARALLEL, WORD INPUT LOADING, 14 us SETTLING TIME, 12-BIT DAC, PDSO24
|
Linear Technology Corporation
Linear Technology, Corp.
|
| ADM1815-10AKS-REEL ADM1815-10AKS-RL7 ADM1815-10ART |
Microprocessor Supervisory in SOT-23 with Active Low Push-Pull Output Choices
Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output, Positive Reset Output
Microprocessor Supervisory in SOT-23 with Low Active OpenDrain Output Choices
Microprocessor Supervisory in SOT-23 with Active Low Open Drain Output Choices
Microprocessor Supervisory in SOT-23 with Active High Push-Pull Output
Microprocessor Supervisory in SOT-23 with Open Drain Output Choices
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
ANALOG DEVICES INC
|
| DS1810 DS1810-10 DS1810-15 DS1810-5 DS1810R-10TR D |
5V EconoReset with Push-Pull Output
|
MAXIM - Dallas Semiconductor
Dallas Semiconducotr
DALLAS[Dallas Semiconductor]
|
| L293B03 |
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMicroelectronics
|
| 809-083 |
Push-Pull Mighty Mouse
|
Glenair, Inc.
|
| DS1815 DS1815-5 DS1815-10 DS1815-15 DS1815R-5TR DS |
3.3V EconoReset with Push-Pull Output
|
DALLAS[Dallas Semiconductor]
MAXIM - Dallas Semiconductor
|
| MC-7852G MC-7852 |
CATV 18 dB PUSH-PULL AMPLIFIER
|
NEC Corp.
NEC[NEC]
CEL[California Eastern Labs]
|
