| PART |
Description |
Maker |
| SF916 |
Designed to Provide Front-end selectivity in 916.50 MHz
|
Vanlong Technology Co.,...
|
| AA-1135-1 |
The 1135 series is designed to provide filtering for DC systems operating in very noisy environments.
|
JMK Inc.
|
| 0237 AA-0237-1 AA-0237-3 AA-0237-5 |
The 237 Series is designed to provide more aggressive performance than the 220 or 221 series.
|
JMK Inc.
|
| ARA1400 ARA1400S12C ARA1400S12CTR |
Reverse Amplifier with Step Attenuator
The ARA1400 is a GaAs IC designed to provide the reverse path amplification and output level control functions in a CATV Set-Top ...
|
ANADIGICS, Inc
Anadigics Inc
|
| HFBR1414 HFBR-1402 HFBR-1402C HFBR-1402M HFBR-1402 |
Components is Designed to Provide cost effective, High performance fiber optic communication links
FIBER OPTIC TRANSMITTER,MODULE-ST
|
HP[Agilent(Hewlett-Packard)]
|
| TCM811 TCM811FERC TCM811LERC TCM811MERC TCM811RERC |
The TCM811 and TCM812 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. A manual reset input is provided to override the reset monitor,
4-Pin Microcontroller Reset Monitors
|
MICROCHIP[Microchip Technology]
|
| TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶???????
IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC
The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
| MM-1477-60 |
The MM-1477-60 filter is designed for use with large computer or motor installations where heavy current is drawn continuously
|
JMK Inc.
|
| REC-14LA REC-16LA |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
| AN4233 |
The purpose of this document is to provide a methodology
|
STMicroelectronics
|
