| PART |
Description |
Maker |
| M5-128/120-5YI M5-128/120-5YC M5-128/160-5YI M5-19 |
Fifth Generation MACH Architecture 第五代马赫架
Fifth Generation MACH Architecture EE PLD, 15 ns, PQFP160
Fifth Generation MACH Architecture EE PLD, 10 ns, PQFP160
Fifth Generation MACH Architecture EE PLD, 7.5 ns, PQFP208
Fifth Generation MACH Architecture EE PLD, 5.5 ns, PQFP100
Fifth Generation MACH Architecture EE PLD, 12 ns, PQFP208
Fifth Generation MACH Architecture EE PLD, 7.5 ns, PQFP160
Fifth Generation MACH Architecture EE PLD, 12 ns, PBGA256
Fifth Generation MACH Architecture EE PLD, 12 ns, PQFP100
Fifth Generation MACH Architecture EE PLD, 15 ns, PBGA352
|
Lattice Semiconductor Corporation
Lattice Semiconductor, Corp.
Air Cost Control
|
| SY100S838ZCTR SY100S838ZC SY100S838LZITR SY100S838 |
(÷1, ÷2/3) OR (÷2, ÷4/6) CLOCK GENERATION CHIP
(1 2/3) OR (2 4/6) CLOCK GENERATION CHIP
SMD-RELAY,2FORMC,5V,1A,140MW,S-S STB,10P
SOLDER WALL MT RECPT
CAP 0.018UF 500V 10% X7R SMD-1210 TR-7 PLATED-NI/SN
(±1, ±2/3) OR (±2, ±4/6) CLOCK GENERATION CHIP 100S SERIES, LOW SKEW CLOCK DRIVER, 4 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO20
|
MICREL[Micrel Semiconductor]
Micrel Semiconductor,Inc.
Micrel Semiconductor, Inc.
|
| 23150-3 7-306105-5 |
Hydraulic Crimping Head
|
TE Connectivity Ltd
|
| JTKCT-004-01-00 |
Hand crimping tool
|
List of Unclassifed Manufacturers
List of Unclassifed Manufac...
|
| 68200-1 46753-3 46758-2 46758-3 |
Terminal Crimping Dies
|
TE Connectivity Ltd
|
| 306209-2 |
Hydraulic Crimping Head, PN 69067
|
TE Connectivity Ltd
|
| R282235003 |
CRIMPING DIES HEX 3.25-2.67 (M22520/5-03)
|
List of Unclassifed Manufacturers
List of Unclassifed Man...
|
| CT-1525 |
CONTROLLED CYCLE CRIMPING TOOL
|
PANDUIT CORP.
|
| DF13B-4S-1.25DS DF13B-6P-1.25C |
1.25mm Pitch Miniature Crimping Connector
|
Hirose Electric USA, INC.
|
| ICM7555CBA ICM7555IBA ICM7556MJD ICM7555 ICM7555IP |
Precision Timing Pulse Generation Sequential Timing Time Delay Generation Pulse Width Modulation Missing Pulse Detector
General Purpose Timer, Dual, CMOS
Precision Timing Pulse Generation Sequential Timing Time Delay Generation Pulse Width Modulation Missing Pulse Detector 低功耗、通用定时
Precision Timing Pulse Generation Sequential Timing Time Delay Generation Pulse Width Modulation Missing Pulse Detector SQUARE, 1 MHz, TIMER, PDIP8
|
INTERSIL[Intersil Corporation]
Intersil, Corp.
|
| 58433-2 58436-1 |
PRO-CRIMPER III Hand Crimping Tool
|
Tyco Electronics
|
