| PART |
Description |
Maker |
| LTC3723-2 |
Synchronous Push-Pull PWM Controllers
|
Linear Technology
|
| MIC383805 MIC3838 MIC3838BMM |
Flexible Push-Pull PWM Controller
|
MIC GROUP RECTIFIERS
Micrel Semiconductor
|
| MIC3838 MIC3839BMM MIC3839 MIC3838BMM |
FLEXIBLE PUSH-PULL PWM CONTROLLER
|
Micrel Semiconductor
|
| LTC3901EGN LTC3901 LTC3901-15 |
Secondary Side Synchronous Driver for Push-Pull and Full-Bridge Converters
|
Linear Technology
|
| SI9124 SI9124DQ-T1 SI9124DQ |
500-kHz Push-Pull DC-DC Converter With Integrated Secondary Synchronous Rectification Control
|
http://
VISAY[Vishay Siliconix]
|
| L293DD013TR L293D L293DD L293D03 L293B-03 L293D-03 |
PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMICROELECTRONICS[STMicroelectronics]
ST Microelectronics
|
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| RFPP3870 |
GaAs/GaN Push Pull Hybrid GaAs/GaN Push Pull Hybridz
|
RF Micro Devices
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| CGY887B CGY887B_1 CGY887B-2015 |
860 MHz/ 27.8 dB gain push-pull amplifier
From old datasheet system
860 MHz, 27.8 dB gain push-pull amplifier
|
Quanzhou Jinmei Electronic ...
NXP Semiconductors
Philips Semiconductors
|
| DS2465P DS246513 DS2465PT MAX7327AEG MAX7327ATG MA |
DeepCover Secure Authenticator with SHA-256 Coprocessor and 1-Wire Master Function
I2C Port Expander with 12 Push-Pull Outputs and 4 Open-Drain I/Os 4 I/O, PIA-GENERAL PURPOSE, PDSO24
I<sup>2</sup>C Port Expander with 12 Push-Pull Outputs and 4 Open-Drain I/Os 4 I/O, PIA-GENERAL PURPOSE, QCC24
2-Wire-Interfaced, 16-Bit, I/O Port Expander with Interrupt and Hot-Insertion Protection 16 I/O, PIA-GENERAL PURPOSE, PDSO24
I<sup>2</sup>C Port Expanders with Eight I/O Ports 8 I/O, PIA-GENERAL PURPOSE, PDSO16
I<sup>2</sup>C Port Expander with 8 Push-Pull and 8 Open-Drain I/Os
16-BIT, FLASH, 12 MHz, RISC MICROCONTROLLER, QCC44
16-BIT, FLASH, 12 MHz, RISC MICROCONTROLLER, QCC32
|
Maxim Integrated Products, Inc.
MAXIM INTEGRATED PRODUCTS INC
|
| S8740240P12 |
GaAs Push Pull Hybrid
|
PDI
|
