| PART |
Description |
Maker |
| 222D211 014291-000 |
THERMOFIT MOLDED PARTS SEPCIFICATION CONTROL DRAWING
|
Tyco Electronics
|
| 382A012-3-0 462A011-3-0 |
Thermofit Molded Parts Specification Control Drawing
|
Tyco Electronics
|
| 2-1196708-4 |
Thermofit Molded Parts Specification Control Drawing Limited Distribution
|
Tyco Electronics
|
| 202D211THRU299 |
THERMOFIT MOLDED RARTS SPECIFICATION CONTROL DRAWING
|
Tyco Electronics
|
| QMR170 QMR150 QMR180 QMR130 QMR160 QMR110 QMR120 Q |
MOLDED PARTS
MOLDED PARTS
|
Qualtek Electronics Corporation
Qualtek Electronics Cor...
|
| HSI2CMOD |
Evaluates: HS I2C-Compatible Parts
Evaluates: HS I2C-Compatible Parts
|
Maxim Integrated Products
|
| T323A474J035AS-C T323A474J035AT-C T323A474K035AS-C |
TANTALUM MOLDED
DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on pages 44-48. See Application Notes Section, page 76 for addi-tional
PERFORMANCE CHARACTERISTICS
TANTALUM MOLDED / AXIAL ?MIL-PRF-49137/1&5
TANTALUM MOLDED / AXIAL . MIL-PRF-49137/1&5
|
Kemet Corporation
|
| MDP16-46 MDP16-45 |
Dual Inline Package, Molded DIP, Rugged, Molded Case Construction, Highly Stable, Automatic Insert Compatible, Available in Tube Pack, Reduces Assembly Costs
|
Vishay
|
| 8655MH2511 |
SHIELDED HOODS - TWO PARTS
|
FCI connector
|
| 1N4819 1N4816 20D8 10D05 10D1 10D10 10D2 10D4 10D6 |
1.5 AND 2.0 AMP MOLDED SILICON RECTIFIER DIODES
V(rrm): 700V; 1.5A molded silicon rectifier diode
From old datasheet system
1.5 AND 2.0 AMP MOLDED SILICON RECTIFIER DIODES 1.5.0安培成型一般整流二极管
V(rrm): 600V; 1.5A molded silicon rectifier diode
V(rrm): 800V; 1.5A molded silicon rectifier diode
|
IRF[International Rectifier]
International Rectifier, Corp.
|
| SOMC |
Dual Inline Package, Small Outline Molded DIP, 14, 16, or 20 Pins, Rugged, Molded Case Construction, Highly Stable, Automatic Surface Mount Compatible, Reduces Assembly Costs,
|
Vishay
|
| SPO18 |
(SPO15 / SPO18) Parts Breakdown
|
Rotary
|
