| PART |
Description |
Maker |
| HCPLT250 |
1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent Technologies
|
| HCPL-0302 |
0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| HCPL-J312 |
2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent(Hewlett-Packard)
|
| ACNW3190 ACNW3190-000E ACNW3190-300E ACNW3190-500E |
5.0 Amp High Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
AVAGO TECHNOLOGIES LIMI...
|
| ACPL-333J-000E |
2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated
|
AVAGO TECHNOLOGIES LIMITED
|
| ACPL-P340-560E ACPL-W340-560E ACPL-P340-060E ACPL- |
1.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO6
|
AVAGO TECHNOLOGIES LIMITED
AVAGO TECHNOLOGIES LIMI...
|
| HCPL-3180 |
HCPL-3180 · 2 Amp Output Current, High Speed IGBT/ MOSFET Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
|
| PM30RHC060 |
TRANSISTOR | IGBT POWER MODULE | 3-PH BRIDGE | 600V V(BR)CES | 30A I(C)
Intellimod-3 Modules: Three Phase Brake, IGBT Inverter Output 30 Amp, 110-230 Volt Line
|
Powerex Power Semiconductors
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| FS100UM-03 |
100 A, 30 V, 0.0054 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220
Bench Power Supply; Output Voltage:30V; Output Current:3A; Number of Outputs:3; Calibrated:Yes; Certificate of Calibration:Yes; Output Current 2:.5A; Output Current 3:.5A; Output Voltage 2:12V; Output Voltage 3:5V
HIGH-SPEED SWITCHING USE
|
Mitsubishi Electric Corporation
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| FOD8316 FOD8316R2 FOD8316R2V FOD8316V |
2.5A Output Current, IGBT Drive Optocoupler
|
Fairchild Semiconductor
|
