| PART |
Description |
Maker |
| MC100EP16VA MC100EP17 MC100EP29 MC100EP35 MC100EP4 |
3.3V / 5V ECL Differential Receiver/Driver with High Gain
3.3V / 5V ECL Quad Differential Driver/Receiver
3.3V / 5V ECL Dual Differential Data and Clock D Flip?Flop With Set and Reset
3.3V / 5V ECL JK Flip?Flop
3.3V/5V ECL 8?Bit Serial/Parallel Converter
3.3V / 5V ECL Differential Data and Clock D Flip?Flop
3.3V / 5V ECL 4:1 Differential Multiplexer
3.3V / 5V ECL 2:1 Multiplexer
9?Bit TTL to ECL Translator
3.3V / 5V ECL 8?Bit Synchronous Binary Up Counter
3.3V / 5V ECL 2?Input Differential AND/NAND
3.3V / 5V ECL Quad 4?Input OR/NOR
3.3V / 5V ECL Quad 2?Input Differential AND/NAND
3.3 V / 5 V Hex Differential Line Receiver/Driver
3.3V / 5V ECL 1:2 Differential Fanout Buffer
3.3V / 5V ECL 卤2/4, 卤4/5/6 Clock Generation Chip
3.3V / 5V ECL Differential Receiver/Driver with Internal Termination
3.3V ECL Programmable Delay Chip
3.3V / 5V ECL D Flip?Flop with Set and Reset
3.3V / 5V ECL 卤2 Divider
3.3V / 5V ECL 卤4 Divider
3.3 V/5 V 8-Bit CMOS/ECL/TTL Data Input Parallel/Serial Converter
3.3V / 5V ECL 6?Bit Differential Register with Master Reset
3.3V / 5V ECL D Flip?Flop with Reset and Differential Clock
3.3V / 5V ECL Dual Differential 2:1 Multiplexer
3.3V / 5V ECL Coaxial Cable Driver
?3.3V / ?5V Triple ECL Input to LVPECL/PECL Output Translator
3.3V LVTTL/LVCMOS to Differential LVPECL Translator
|
ONSEMI[ON Semiconductor]
|
| AND8090 AND8090D MC100H601 MC100H601FN MC10H106FN |
3.3V / 5V ECL Quad 2-Input Differential AND/NAND
5V ECL Low Impedance Driver
LOW VOLTAGE DUAL 1:4, 1:5 DIFFERENTIAL FANOUT BUFFER
8 Input Priority Encoder
3.3V ECL Triple D-Type Flip-Flop with Set and Reset
3.3V / 5V ECL Quad D Flip Flop with Set, Reset, and Differential Clock
3.3V Dual Differential LVPECL to LVTTL Translator
3.3V / 5V ECL 6-Bit Differential Register with Master Reset
3.3V ECL 1:15 Differential ÷1/÷2 Clock Driver
Fibre Channel Coaxial Cable Driver and Loop Resillency Circuit
3.3 V 1:9 Differential HSTL/PECL to HSTL Clock Driver with LVTTL Clock Select and Enable
3.3V / 5V ECL 8-Bit Synchronous Binary Up Counter
2.5 V/3.3 V SiGe Selectable Differential Clock and Data D Flip-Flop/Clock Divider with Reset and OLS
3.3V / 5V Programmable PLL Synthesized Clock Generator (25 to 400 MHz)
2.5 V/3.3 V SiGe 1:2 Differential Clock Driver with RSECL Outputs
2.5 V/3.3 V SiGe 1:10 Differential Clock Driver with RSECL Outputs
Triple 4-3-3-Input NOR Gate
9-Bit ECL-TTL Translator
AC Characteristics of ECL Devices
|
Motorola
ONSEMI[ON Semiconductor]
|
| MC10EP29MNTXG |
3.3V / 5V ECL Dual Differential Data and Clock D Flip−Flop With Set and Reset 10E SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, QCC20
|
ON Semiconductor
|
| MC100LVEL30-D |
3.3V ECL Triple D Flip-Flop with Set and Reset
|
ON Semiconductor
|
| MC100EP29DT MC100EP29DTR2 MC10EP29 MC10EP29DT MC10 |
From old datasheet system
3.3V / 5V ECL Dual Differential Data and Clock D Flip-Flop With Set and Reset
|
ON Semiconductor
|
| MC74HC109 ON1335 |
Dual J-K Flip-Flop with Set and Rest
From old datasheet system
DUAL J-K FLIP-FLOP WITH SET AND RESET
|
Motorola, Inc
ON Semi
|
| 74AUP1G74GT-G 74AUP1G74GF |
Low-power D-type flip-flop with set and reset; positive-edge trigger AUP/ULP/V SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO8
|
NXP Semiconductors N.V.
|
| 74AUP1G74GD 74AUP1G74GM125 |
Low-power D-type flip-flop with set and reset; positive-edge trigger
Low-power D-type flip-flop with set and reset; positive-edge trigger; Package: SOT902-1 (XQFN8U); Container: Reel Pack, Reverse, Reverse
|
NXP Semiconductors
|
| 74HC74DR2 74HC74DG |
Dual D Flip−Flop with Set and Reset High−Performance Silicon−Gate CMOS HC/UH SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14
|
ON Semiconductor
|
| SY10EL31ZG SY10EL31ZITR SY10EL3105 SY10EL31ZGTR SY |
D FLIP-FLOP WITH SET AND RESET
|
MICREL[Micrel Semiconductor]
|
