| PART |
Description |
Maker |
| CS5014-BP14 CS5014-KP14 CS5012A-BP12 CS5014-KL14 C |
12/14/16-Bit, Self-calibrating A/D Converters
16, 14 & 12-Bit, Self-Calibrating A/D Converters
|
CIRRUS[Cirrus Logic]
|
| AD760AQ AD760 |
16/18-Bit Self-Calibrating Serial/Byte DACPORT
|
Analog Devices
AD
|
| AD760 |
16-18-Bit Self-Calibrating Serial/Byte DACPORT
|
Analog Devices
|
| ATS671LSE-LT ATS671LSE |
Self-Calibrating TPOS Gear-Tooth Sensor with 9-Bit Signal Capture
SPECIALTY ANALOG CIRCUIT, PSSS4
|
Allegro MicroSystems
|
| ATS632LSC ATS535CSB ATS535JSB ATS640JSB ATS610LSA |
ZERO-SPEED, SELF-CALIBRATING, NON-ORIENTED, HALL-EFFECT GEAR-TOOTH SENSOR
ZERO-SPEED/ SELF-CALIBRATING/ NON-ORIENTED/ HALL-EFFECT GEAR-TOOTH SENSOR
|
ALLEGRO[Allegro MicroSystems]
|
| ATS643LSH-I2 ATS643LSH-I1 |
ATS643LSH Self-Calibrating, Zero-Speed Differential Gear Tooth Sensor with Continuous Update
|
Allegro MicroSystems, Inc.
|
| ATS612LSG |
DYNAMIC, SELF-CALIBRATING, PEAK-DETECTING, DIFFERENTIAL HALL-EFFECT GEAR-TOOTH SENSOR
|
ALLEGRO[Allegro MicroSystems]
|
| TLE4941-2 |
Hall Sensors - Self calibrating Hall IC with 2nd edge capability
|
Infineon
|
| TLE4942-2 |
Hall Sensors - Self calibrating Hall IC with 2nd edge capability
|
Infineon
|
| TLE4942 |
Hall Sensors - Self calibrating Hall IC
|
Infineon
|
| TLE4941 |
Hall Sensors - Self calibrating Hall IC
|
Infineon
|
| IS24C02A-2GLI IS24C02A IS24C16A-3ZLA3 IS24C02A-2DL |
1K-BIT/2K-BIT/4K-BIT/8K-BIT/16K-BIT 2-WIRE SERIAL CMOS EEPROM
|
ISSI[Integrated Silicon Solution, Inc]
|
