| PART |
Description |
Maker |
| CAT803ZTBI-GT3 CAT809ZSDI-GT3 CAT809RSDI-GT3 CAT81 |
Supervisor, Open drain, Act low 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
Supervisor, Push-pull, Act low 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
Supervisor, Push-pull, Act high 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
ON Semiconductor
|
| 74VHCT373A 74VHCT373ASJX 74VHCT373M 74VHCT373AMTCX |
Supervisor w/5K Pull-Up Active Low, -40C to 85C, 3-TO-92, BAG
From old datasheet system
Octal D-Type Latch with 3-STATE Outputs
Supervisor w/5K Pull-Up Active Low, -40C to 85C, 8-SOIC 150mil, TUBE
8-Bit D-Type Latch
|
Fairchild Semiconductor
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| MIC2787-XFYMT MIC2787-YHYMT MIC2787-XEYMT MIC2787- |
Push-Button Reset IC with Voltage Supervisor
|
http://
Micrel Semiconductor
|
| AAT4296 AAT4298 |
Five/Six Channel Push/Pull I/O Expander
|
Advanced Analogic Technologies
|
| SGM8704 |
Push-Pull Output Comparator
|
Shengbang Microelectron...
|
| S8740200P |
GaAs Push Pull Hybrid
|
PDI
|
| S8740240GT |
GaAs Push Pull Hybrid
|
PDI
|
| DS1810R-15-U DS1810R-5-U |
5V EconoReset with Push-Pull Output
|
MAXIM - Dallas Semiconductor
|
| DRF130111 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
|
