| PART |
Description |
Maker |
| LTC8143FNPBF LTC8143FSWPBF LTC8143FSWTRPBF LTC7543 |
Improved Industry Standard Serial 12-Bit Multiplying DACs
|
Linear Technology
|
| LTC7545AKNPBF LTC7545ABSWTRPBF LTC7545ABGTR |
Improved Industry Standard Parallel 12-Bit Multiplying DAC
|
Linear Technology
|
| ISL78215 ISL78215AUZ ISL78215AUZ-T |
Improved Industry Standard Single-Ended Current Mode PWM Controller
|
Intersil Corporation
|
| LTC7545ACNPBF LTC7545ABNPBF LTC7545ABSWPBF |
Improved Industry Standard Parallel 12-Bit Multiplying DAC; Package: PDIP; No of Pins: 20; Temperature Range: 0°C to 70°C PARALLEL, WORD INPUT LOADING, 12-BIT DAC, PDIP20
Improved Industry Standard Parallel 12-Bit Multiplying DAC; Package: PDIP; No of Pins: 20; Temperature Range: -40°C to 85°C PARALLEL, WORD INPUT LOADING, 12-BIT DAC, PDIP20
Improved Industry Standard Parallel 12-Bit Multiplying DAC; Package: SO; No of Pins: 20; Temperature Range: -40°C to 85°C
|
Linear Technology, Corp.
LINEAR TECHNOLOGY CORP
|
| ISL6845 ISL6843IU ISL6843IB ISL6844IB ISL6844 ISL6 |
Octal Buffers/Drivers With 3-State Outputs 20-SSOP -40 to 85 1 A SWITCHING CONTROLLER, 2000 kHz SWITCHING FREQ-MAX, PDSO8
Octal Buffers/Drivers With 3-State Outputs 20-SO -40 to 85 1 A SWITCHING CONTROLLER, 2000 kHz SWITCHING FREQ-MAX, PDSO8
Improved Industry Standard Single Ended Current Mode PWM Controller
Improved Industry Standard Single-Ended Current Mode PWM Controller
From old datasheet system
|
Intersil, Corp.
INTERSIL[Intersil Corporation]
|
| TC962COE TC962CPA TC962EPA TC962IJA TC962MJA TC962 |
The TC962 is an advanced version of the industry-standard 7662 high-voltage DC-to-DC converter. Using improved design techniques and CMOS construction, the TC962 can source as much as 80mA versus the 7662 ’s 20mA capability. As an in
From old datasheet system
High Current Charge Pump DC-to-DC Converter
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
|
| ARE1303 ARE1303Z ARE1306 ARE1309 ARE1312 ARE1312Z |
RE-relay. 2.6 GHz 75 ohm relays for broadcasting industry. Standard PC board terminal. Nominal voltage 4.5 V DC.
2.6 GHZ 75з RELAYS FOR BROADCASTING INDUSTRY
2.6 GHz 75 RELAYS FOR BROADCASTING INDUSTRY
2.6 GHz 75?/a> RELAYS FOR BROADCASTING INDUSTRY
|
Matsushita Electric Works(Nais)
NAIS[Nais(Matsushita Electric Works)]
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| MAH501027AH MAH501027BH MAH501027H MAHF205027AH MA |
Industry Standard Package
|
MMD Components
http://
|
| IRF7910PBF-1 IRF7910PBF-1-15 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
| S48SA S48SA3R310NRFA |
Industry standard footprint and pin out
|
Delta Electronics, Inc.
|
