| PART |
Description |
Maker |
| MT88E45 |
Dual inputs (tip/ring and 4 wire) Extended Voltage Calling Number Identification Circuit for CLIP, CID and CIDCW applications (Type 2)
|
Zarlink Semiconductor
|
| MT88E45B |
Dual inputs (tip/ring and 4 wire) Extended Voltage Calling Number Identification Circuit for CLIP, CID and CIDCW applications (Type 2)
|
Zarlink Semiconductor
|
| C0805C103MARAC C0805C101JARAC C0805C101KARAC C0805 |
Surface Mount Tip & Ring Ceramic Chip Capacitors
|
KEMET[Kemet Corporation]
|
| 54127899 98F003PT-R7 35F2542PT-H7 35F2547PT-K8 35F |
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits
TIP PT SLOPED ROUND 3.2MM
TIP PT CONICAL 0.8MM
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
TIP PT-AA7 SLOPED ROUND 1.6MM
TIP PT SLOPED ROUND 1.2MM
TIP PT SCREWDRIVER 1.2MM 提示葡萄牙螺丝刀1.2毫米
TIP PT SCREWDRIVER 0.8MM 提示葡萄牙螺丝刀0.8毫米
TIP PT SCREWDRIVER 1.6MM 提示葡萄牙螺丝刀1.6mm
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits 提示葡萄牙螺丝刀0.8毫米
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits 提示葡萄牙倾斜.6mm
|
Opto 22
NXP Semiconductors N.V.
ITT, Corp.
|
| SM055C395KHN480 SM055C475KHN480 SM045C106KHN480 SM |
AVX Advanced Ceramic Capacitors for Power Supply, High Voltage and Tip and Ring Applications
|
AVX Corporation
|
| C0805C472KARACTU |
Capacitor, Ceramic, SMD, MLCC, Tip & Ring, Temperature Stable, 4700 pF, /-10% Tol, 250 V, X7R, 0805 (2012 metric)
|
Kemet Corporation
|
| MH88628 |
Long loop (OPS) Central Office SLIC with 2-4 wire conversion, Programmable line impedance, ringing amplification, Unbalanced and tip/ring reversal detection and On-hook transmission for DID
|
Zarlink Semiconductor
|
| BY359X-1500 BY359X-1500S |
Damper diode fast/ high-voltage
SCREWDRIVER, SENSO SLOT 3.0 X 75SCREWDRIVER, SENSO SLOT 3.0 X 75; Tip Size A x B:3 x 0.5mm; Tip size:3mm; Length, blade:75mm; Length, Inches:3"; Handle type:COLOUR CODED; Tip Size:3 mm; Tip type:Parallel Slot 1500 V, SILICON, RECTIFIER DIODE
DAMPER DIODE FAST, HIGH-VOLTAGE
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
http://
|
| MUR10005CT MUR10010CT MUR10020CT MUR10040CT MUR100 |
SMTC Series Soldering Tip Cartridge; Tip/Nozzle Style:Micro Fine Hoof; Tip/Nozzle Width:0.045"; Features:Series 700; For Use With:OK Internationals STSS & MX Series Soldering Rework Stations; MX-RM3E Soldering/Rework Handpiece
100 Amp Supre Fast Recovery Rectifier 50 to 600 Volts 100安培Supre快恢复整000伏特
|
Micro Commercial Components Corp.
Micro Commercial Components, Corp.
MCC[Micro Commercial Components]
|
| CA-QFE44SE-M-Z-T-01 |
Carrier Adaptor 44 position QFP Carrier Adaptor to mini grid. Package specs: 12mm tip to tip, 10mm body, 0.8mm pitch.
|
Ironwood Electronics.
|
| RD6.8UJ RD15UJ RD4.7UJ RD5.1UJ RD10UJ RD11UJ RD12U |
LOW NOISE SHARP BREAKDOWN CHARACTERISTICS ZENER DIODES 2PIN ULTRA SUPER MINI MOLD
DIODE, SMA, 60V, 1A, SCHOTTKY
CAT6 SOL PC PVC WHI 15FT PVC SOLID PATCH CORD
surface mount silicon Zener diodes
SCREWDRIVER, XONIC PH NO.1 X 80SCREWDRIVER, XONIC PH NO.1 X 80; Tip type:Phillips; Length, blade:80mm; Driver type:Phillips No 1; Handle type:Static diss; Tip Size:No.1
SCREWDRIVER, XONIC PH NO.000 X 60SCREWDRIVER, XONIC PH NO.000 X 60; Tip type:Phillips; Length, blade:60mm; Driver type:Phillips No 000; Handle type:SHATTERPROOF CELLULOSE ACETATE; Length:60mm; Tip Size:No.000 低噪声夏普稳压二极管击穿特PIN超超级迷你模
SCREWDRIVER, XONIC PH NO.00 X 60SCREWDRIVER, XONIC PH NO.00 X 60; Tip type:Phillips; Length, blade:60mm; Driver type:Phillips No 00; Handle type:Static diss.; Tip Size:No.00 低噪声夏普稳压二极管击穿特PIN超超级迷你模
6.8 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE
4.7 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE
5.6 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE
5.1 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE
|
http://
NEC[NEC]
NEC Corp.
NEC, Corp.
|
