| PART |
Description |
Maker |
| PCA0174A-LF |
PHASE NOISE (1 Hz BW, typical)
|
Z-Communications, Inc
|
| HTQF5361 |
1.0 pS phase jitter ( typical )
|
Mercury United Electron...
|
| BGA318 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz)
|
Siemens Semiconductor Group
|
| VTD175 VTD170XS VTD170 VTD175L VTD175S VTD175XL VT |
85 ∑C to -40 ∑C 10 times % typical resistance change
85 ∑C to -40 ∑C 10 times 【5 % typical resistance change
POLYFUSE RESETTABLE FUSES
85 °C to -40 °C 10 times ±5 % typical resistance change
|
Littelfuse, Inc.
|
| ABV0239QCL-T ABV0235 ABV0235OC ABV0235OCL ABV0235O |
750kHz - 800MHz Low Phase Noise Multiplier VCXO
750kHz - 800MHz Low Phase Noise Multiplier VCXO VCXO, CLOCK, CMOS OUTPUT
750kHz - 800MHz Low Phase Noise Multiplier VCXO VCXO, CLOCK, PECL OUTPUT
750kHz - 800MHz Low Phase Noise Multiplier VCXO VCXO, CLOCK, LVDS OUTPUT
|
ABRACON[Abracon Corporation]
Abracon, Corp.
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| DXO720840-5 |
Low Phase Noise
|
SYNERGY MICROWAVE CORPO...
|
| TFF11115HN |
Low phase noise LO generator
|
NXP Semiconductors N.V.
|
| AN-0982 |
The Residual Phase Noise Measurement
|
Analog Devices
|
| TFF11105HN |
Low Phase Noise LO Generator
|
Philips Semiconductors
|
| Y1600 |
Rugged XO/Low Phase Noise
|
EUROQUARTZ limited
|
| MK2732-06 |
Low Phase Noise VCXO Multiplier
|
ICS
|
