| PART |
Description |
Maker |
| AT90S2313 |
2-Kbyte In-System programmable Flash Program Memory, 160 byte SRAM, 128 Byte EEPROM, Up to 10 MIPS throughput at 10 Mhz.
8-bit Microcontroller with 2K Bytes of In-System
Programmable Flash
|
ATMEL
|
| ATTINY11 ATTINY12 |
1-Kbyte In-System programmable Flash Program Memory, 32 byte SRAM, Up to 6 MIPS throughput at 6 Mhz.
1-Kbyte In-System programmable Flash Program Memory, 32 byte SRAM, 64 Byte EEPROM, Up to 8 MIPS throughput at 8 Mhz.
|
Atmel
|
| ATTINY13 |
1-Kbyte In-System programmable Flash Program Memory, 64-Byte SRAM, 64-Byte EEPROM, 32-Byte Register File, 4-channel 10-bit A/D, Up to 16 MIPS throughput at 16 MHz, 5 Volts. 1.8 - 5.5 Volt Operation.
|
Atmel
|
| KS57C0502 KS57C0504 KS57P0504 |
(KS57C0502 - KS57P0504) single-chip CMOS microcontroller
The KS57P0504 is the microcontroller which has 4 Kbyte one-time-programmable ROM and the functions are the same to KS57C0502/C0504
The KS57P0504 is the microcontroller which has 4 Kbyte one-time-programmable ROM and the functions are the same to KS57C0502/C0504
|
Samsung semiconductor
|
| ISPLSI2128VE ISPLSI2128VE-100LB100 ISPLSI2128VE-10 |
3.3V In-System Programmable SuperFAST?High Density PLD
CRYSTAL 32.768KHZ 12.5PF SMD
3.3V In-System Programmable SuperFAST?/a> High Density PLD
3.3V In-System Programmable SuperFAST⑩ High Density PLD
3.3V In-System Programmable SuperFAST High Density PLD
CRYSTAL 12.0 MHZ 20PF SMD
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PQFP176
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PBGA208
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 6 ns, PBGA208
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 10 ns, PBGA100
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PBGA100
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PQFP160
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PQFP100
3.3V In-System Programmable SuperFASTHigh Density PLD 3.3在系统可编程超快⑩高密度可编程逻辑器件
3.3VIn-SystemProgrammableSuperFASTHighDensityPLD
3.3V In-System Programmable SuperFAST?/a> High Density PLD
|
LATTICE[Lattice Semiconductor]
Lattice Semiconductor Corporation
Lattice Semiconductor, Corp.
|
| ST10F272 ST10F272Z2Q3 ST10F272Z2T3 |
16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM
|
STMicroelectronics
|
| ST10F276_06 ST10F276 ST10F276Z5Q3 ST10F276Z5T3 |
16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbyte RAM
|
STMICROELECTRONICS[STMicroelectronics]
|
| ST10F28012 |
16-bit MCU with MAC unit, 512 Kbyte Flash memory and 18 Kbyte RAM
|
STMicroelectronics
|
| ST10F276Z5 ST10F276Z507 |
16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbyte RAM
|
STMicroelectronics
|
| ATMEGA128 ATMEGA128L |
128-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz.
128-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 8 MIPS throughput at 8 Mhz. 3 Volt Operation.
|
Atmel
|
