| PART |
Description |
Maker |
| AN245 |
DESIGNING MULTIPLE OUTPUT POWER SUPPLIES WITH THE L296 AND L4960
|
SGS Thomson Microelectronics
|
| AN10897 |
A guide to designing for ESD and EMC
|
NXP Semiconductors
|
| AN1517 |
DESIGNING WITH L5972D,UP TO 2A HIGH EFFICIENCY DC/DC CONVERTER
|
SGS Thomson Microelectronics
|
| AN603 |
Designing With the Si9978DW Configurable H-Bridge Controller
|
Vishay
|
| EVALA5970D AN1330 |
Designing with the L5970D 1A high efficiency DC-DC converter
|
STMicroelectronics
意法半导
|
| AND8053_D AND8053.REV0 |
Designing CrystalOscillators with ModernCMOS Gates
From old datasheet system
|
ON Semiconductor
|
| AN-502 |
Designing a Superheterodyne Receiver Using an IF Sampling Diversity Chipset
|
Analog Devices
|
| AN704 |
Designing DC/DC Converters to Meet CCITT Specifications for ISDN Terminals
|
Vishay
|
| AN716 |
Designing with Siliconix PC Card (PCMCIA) Power Interface Switches
|
Vishay
|
| SAWX4A0X |
Designing with Acriche A4 Connect using a siple diode bridge directly to AC power
|
Seoul Semiconductor
|
| AN1499 |
ST9 - DESIGNING A LOW COST POWER BOARD FOR THE ST92141 MOTOR CONTROL MCU WITHOUT USING IPMS
|
SGS Thomson Microelectronics
|
| AN729 |
Designing A High-Frequency, Higher-Power Buck/Boost Converter for Multi-Cell Input Configurations Using Si9168
|
Vishay
|
