| PART |
Description |
Maker |
| ZF-1438-30 |
The ZF-1438-30 filter has been designed to operate with telecommunication systems.
|
JMK Inc.
|
| SF2060B-1 |
115.18 MHz SAW Filter
Designed for SDARS Receiver IF Application
|
Murata Manufacturing Co., Ltd.
RF Monolithics, Inc
|
| AA-1506-12 AA-1506-12B |
This economical filter is designed to operate in severe environments such as Mil-Std-704.
|
JMK Inc.
|
| FF-1237-10 |
The FF-1237-10 is a 3 phase delta filter designed to work with motors controls or other 3ph power conversion systems.
The FF-1237-10 is a 3 phase delta filter designed to work with motors controls or other 3ph power conversion systems.
|
JMK Inc.
|
| ZA-1536-10 |
The ZA-1536-10 filter has been designed to operate with the Mission power solutions “BADGER power supply.
|
JMK Inc.
|
| REC-14LA REC-16LA |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
| P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available
Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
| ZM-1758-40 |
The ZM-1758-40 filter is designed to work with systems with requirements to meet Mil-Std-461D or Mil-Std-461E.
|
JMK Inc.
|
| MAS1215-33 MAS1220-33 |
Equipment Designed to Conform EMI Regulations Such As VCCICISPRFCCVDEetc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
LAMBDA[DENSEI-LAMBDA]
|
| MX316LH MX316 MX316P MX316J |
SWITCHED CAPACITOR FILTER, LOWPASS, PQCC24
NMT Audio Filter Array
Analog Filter 模拟滤波
|
CML MICROSYSTEMS PLC
CMLMICRO[CML Microcircuits]
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| MBS1230-22 MBS1205 MBS1205-22 MBS1210-22 MBS1215-2 |
Equipment Designed to Meet EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc
Equipment Designed to Meet EMI Regulations Such As VCCICISPRFCCVDEetc
Equipment Designed to Meet EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
LAMBDA[DENSEI-LAMBDA]
|
