| PART |
Description |
Maker |
| RA4L-12W-K RA4L-D12W-K RA4-12W-K |
MINIATURE RELAY 4 POLES-1 to 2 A (FOR SIGNAL SWITCHING)
|
Fujitsu Component Limited.
|
| FBR46ND003-P-15 FBR46ND003-P-16 FBR46ND024-P FBR46 |
MINIATURE RELAY 2 POLES-1 to 2 A (FOR SIGNAL SWITCHING)
|
Fujitsu Component Limit...
Fujitsu Component Limited.
|
| RA4-D12W-K |
MINIATURE RELAY 4 POLES-1 to 2 A (FOR SIGNAL SWITCHING)
|
Fujitsu Component Limited.
|
| UR1-12W-K UR1L-12W-K UR1-D12W-K UR1L-D12W-K |
MINIATURE RELAY 2 POLES (HIGH FREQUENCY SIGNAL SWITCHING)
|
Fujitsu Component Limited.
|
| FTR-C1 FTR-C1CA012G FTR-C1CB012G FTR-C1GA012G FTR- |
POWER RELAY 2 POLES-2A High Insulation/wide Gap
|
Fujitsu Component Limited.
|
| FTR-F1AA060T-RG FTR-F1CA110V FTR-F1CA110V-RG FTR-F |
POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.029A (COIL), 18VDC (COIL), 530mW (COIL), 5A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT
POWER RELAY 2 POLES-5 A LOW PROFILE TYPE
|
Fujitsu Component Limited.
http://
Fujitsu Component Limit...
|
| RIF-0-OPT-24DC |
Pre-assembled solid-state relay module with push-in connection, consisting of: relay base with ejector and plug-in miniature solid-state relay. Input voltage: 24 V DC. Output: 3 - 33 V DC/3 A
|
PHOENIX CONTACT
|
| RIF-RHM-1 |
Relay retaining bracket, wire model, suitable for RIF-1 relay base, for 16 mm high octal miniature power and solid-state relays
|
PHOENIX CONTACT
|
| FTR-C210 FTR-C2CB012G FTR-C2GA012G FTR-C2GB012G FT |
SIGNAL RELAY 2 POLES - 2A High Isolation Wide Contact Gap 2.0mm Contact Gap
POWER/SIGNAL RELAY, DPDT, LATCHED, 0.03A (COIL), 5VDC (COIL), 150mW (COIL), 2A (CONTACT), 220VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT
|
Fujitsu Component Limited.
FUJITSU LTD
|
| RIF-1-BPT |
RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5
|
PHOENIX CONTACT
|
| ST-REL7-KG60 |
Relay connector, fitted with miniature switching relay, contacts (AgNi): Medium to large loads, 2 PDT, 60 V AC/ DC input voltage, with light indicator, can be plugged into basic terminal blocks
|
PHOENIX CONTACT
|
