PART |
Description |
Maker |
DS1812-15 DS1812 DS1812-5 DS1812-10 |
5V EconoReset with Active High Push-Pull Output
|
DALLAS[Dallas Semiconductor] DALLAS[Dallas Semiconducotr]
|
DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL From old datasheet system
|
ST Microelectronics STMICROELECTRONICS[STMicroelectronics]
|
CGA-7718Z |
PUSH-PULL 50MHz to 1000MHz HIGH LINEARITY InGaP HBT AMPLIFIER
|
RF Micro Devices
|
HV510X HV510 HV510WG |
240V/ 12-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs 240V, 12-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs
|
Supertex Inc SUTEX[Supertex, Inc] Supertex Inc
|
A1750A A1750A42FFFC06 A1750A42FFFC10 A1750A42FFSC0 |
DWDM analog return-path(5MHz-210MHz) module. Connector FC/APC. Optical power 10 mW. DWDM analog forward-path(40MHz-860MHz) module. Connector FC/APC. Optical power 8 mW. DWDM analog forward-path(40MHz-860MHz) module. Connector SC/APC. Optical power 8 mW. DWDM analog return-path(5MHz-210MHz) module. Connector SC/APC. Optical power 10 mW. DWDM analog return-path(5MHz-210MHz) module. Connector FC/APC. Optical power 8 mW. DWDM analog forward-path(40MHz-860MHz) module. Connector SC/APC. Optical power 10 mW. DWDM analog forward-path(40MHz-860MHz) module. Connector SC/APC. Optical power 6 mW. DWDM analog forward-path(40MHz-860MHz) module. Connector FC/APC. Optical power 10 mW. DWDM analog forward-path(40MHz-860MHz) module. Connector FC/APC. Optical power 6 mW. A1750A DWDM Analog Forward-Path or Return-Path Laser Module DWDM analog return-path(5MHz-210MHz) module. Connector SC/APC. Optical power 6 mW. DWDM analog return-path(5MHz-210MHz) module. Connector SC/APC. Optical power 8 mW. DWDM analog return-path(5MHz-210MHz) module. Connector FC/APC. Optical power 6 mW.
|
Agere Systems
|
ADM6316CY29ARJ-RL7 ADM6316CY46ARJ-RL7 ADM6316DZ26A |
Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Push-Pull Reset Output Supervisory Circuit with Watchdog and Dual Active-Low/Active-High Push-Pull Reset Outputs Supervisory Circuit with Manual Reset and Dual Active-Low/Active-High, Push-Pull Reset Outputs Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Open-Drain Reset Output Supervisory Circuit with Manual Reset and Dual Active-Low Open-Drain/Active-High Push-Pull Reset Outputs
|
Analog Devices
|
HV57708PG RBHV57708DG HV57708 HV57708DG HV57708X |
32 MHz, 64-Channel Serial To Parallel Converter With Push-Pull Outputs EL DISPLAY DRIVER, CQFP80 32 MHz 64-Channel Serial To Parallel Converter With Push-Pull Outputs
|
Supertex, Inc. SUTEX[Supertex Inc] SUTEX[Supertex, Inc]
|
HV930807 HV9408PJ HV9408X HV9308 HV9308PJ HV9308X |
32-Channel Serial To Parallel Converter With High Voltage Push-Pull Outputs
|
Supertex, Inc
|
MAX814 MAX814C MAX815 MAX815C MAX815CPA MAX815CSA |
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. -1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit. 【1% Accuracy, Low-Power, 3V and 5V レP Supervisory Circuits 1% Accuracy Low-Power 3V and 5V P Supervisory Circuits 1% Accuracy, Low-Power, 3V and 5V P Supervisory Circuits ±1% Accuracy, Low-Power, 3V and 5V μP Supervisory Circuits ??% Accuracy, Low-Power, 3V and 5V ?? Supervisory Circuits -1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. -1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit.
|
Maxim Integrated Produc... MAXIM - Dallas Semiconductor MAXIM[Maxim Integrated Products] MAXIM INTEGRATED PRODUCTS INC
|
FP203 |
Push-Pull Circuits
|
Sanyo Semicon Device
|
DRF130111 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
|