| PART |
Description |
Maker |
| UJA1078A |
High-speed CAN/dual LIN core system basis chip
|
NXP
|
| UJA1078ATW |
High-speed CAN/dual LIN core system basis chip
|
NXP Semiconductors
|
| L99PM72GXP |
Advanced power management system IC with embedded LIN and high speed CAN transceiver supporting CAN Partial Networking
|
ST Microelectronics
|
| USB-8472 NIUSB-8472 NIUSB-8472S NIUSB-8473 NIUSB-8 |
1-port interfaces for high-speed CAN,low-speed/fault-tolerant CAN, and LIN
|
http://
|
| UJA1076ATW |
High-speed CAN core system basis chip
|
NXP Semiconductors
|
| UJA1061 UJA1061TW |
Low speed CAN/LIN system basis chip
|
PHILIPS[Philips Semiconductors]
|
| MC33910G5AC 3391010 |
LIN System Basis Chip with High
|
Freescale Semiconductor, Inc
|
| ATA663203-14 ATA663231-14 |
LIN Bus Device Family including Voltage Regulator and LIN SBC with Compatible Footprint
|
ATMEL Corporation
|
| 33663 |
LIN 2.1 / SAEJ2602-2 Dual LIN Physical Layer
|
Freescale Semiconductor
|
| CW201212-R33J CW201212-12NJ CW201212-R56J CW201212 |
MAGNETICS-HIGH Q CHIP INDUCTOR 1 ELEMENT, 0.33 uH, CERAMIC-CORE, GENERAL PURPOSE INDUCTOR, SMD
MAGNETICS-HIGH Q CHIP INDUCTOR 1 ELEMENT, 0.012 uH, CERAMIC-CORE, GENERAL PURPOSE INDUCTOR, SMD
MAGNETICS-HIGH Q CHIP INDUCTOR 1 ELEMENT, 0.56 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
MAGNETICS-HIGH Q CHIP INDUCTOR 1 ELEMENT, 0.91 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
MAGNETICS-HIGH Q CHIP INDUCTOR 1 ELEMENT, 0.0033 uH, CERAMIC-CORE, GENERAL PURPOSE INDUCTOR, SMD
Inductor; Inductor Type:High Frequency; Inductance:13.3nH; Inductance Tolerance: /- 5 %; Current Rating:600mA; Series:CW201212; Package/Case:0805; Core Material:Alumina Ceramic; Leaded Process Compatible:Yes RoHS Compliant: Yes
|
Bourns, Inc.
BOURNS INC
|
| 2SC4203 E000913 |
EPITAXIAL PLANAR TYPE (VIDEO OUTPUT FOR HIGH DEFINITION VDT HIGH SPEED SWITCHING APPLICATIONS)
From old datasheet system
VODEO OUTPUT FOE HIGH DEFINTION VDT HIGH SPEED SWITCHING APPLICATIONS
|
Toshiba Semiconductor
|
| 5900-6R8-RC 5900-270-RC 5900-180-RC 5900-821-RC 59 |
High I , Axial Choke 1 ELEMENT, 6.8 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
High I , Axial Choke 1 ELEMENT, 27 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
High I , Axial Choke 1 ELEMENT, 18 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
High I , Axial Choke 1 ELEMENT, 820 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
High I , Axial Choke 1 ELEMENT, 22000 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
RF Choke; Series:5900; Inductance:330uH; Inductance Tolerance: /- 10 %; Terminal Type:Axial Leaded; Core Material:Ferrite; Current Rating:1.6A; Leaded Process Compatible:Yes; Mounting Type:Through Hole; Resistance:0.212ohm
High Current Chokes
|
Bourns, Inc.
TE Connectivity, Ltd.
Jameco Electronics
BOURNS INC
Bourns Electronic Solutions
Bourns Electronic Solut...
|
|
