| PART |
Description |
Maker |
| TDA4817 TDA4817G Q67000-A8299 Q67000-A8298 |
PFC IC for High Power Factor and Acti...
From old datasheet system
Power Factor Controller IC for High Power Factor and Active Harmonic Filtering 0.5 A POWER FACTOR CONTROLLER, PDIP8
Power Factor Controller IC for High Power Factor and Active Harmonic Filtering 功率因数控制器IC，用于高功率因数，有源谐波滤
|
SIEMENS[Siemens Semiconductor Group]
Infineon
SIEMENS AG
|
| TDA4862G TDA4862 Q67006-A8369-A703 Q67000-A8368-A2 |
Power-Factor Controller PFC IC for High Power Factor and Active Harmonic Filter
From old datasheet system
|
SIEMENS[Siemens Semiconductor Group]
|
| TDA4863-205 TDA4863-2 TDA4863-2G Q67040-S4620 Q670 |
Power-Factor Controller (PFC) IC for High Power Factor and Low THD
|
Infineon Technologies AG
|
| ICE2PCS01 ICE2PCS01G |
Standalone Power Factor Correction (PFC) Controller in Continuous Conduction Mode (CCM)
POWER FACTOR CONTROLLER, 315 kHz SWITCHING FREQ-MAX, PDIP8
|
Infineon Technologies AG
|
| ML4824 ML4824CP1 ML4824CP2 ML4824CS1 ML4824CS2 ML4 |
Power Factor Correction and PWM Controller Combo
Power Factor Correction and PWM Controller Combo 0.5 A POWER FACTOR CONTROLLER WITH POST REGULATOR, 250 kHz SWITCHING FREQ-MAX, PDIP16
|
FAIRCHILD[Fairchild Semiconductor]
Fairchild Semiconductor Corporation
Fairchild Semiconductor, Corp.
|
| 7700B 7700-2A |
Power Factor Correction Power Module 1-OUTPUT 3000 W AC-DC PWR FACTOR CORR MODULE
Power Factor Correction Power Module 1-OUTPUT 4000 W AC-DC PWR FACTOR CORR MODULE
|
BI Technologies, Corp.
|
| NCP1652A NCP1652DWR2G NCP1652ADR2G NCP1652DR2G NCP |
High-Efficiency Single Stage Power Factor Correction and Step-Down Controller
High Efficiency Single Stage Power Factor Correction and Step-down Controller
POWER FACTOR CONTROLLER, 250 kHz SWITCHING FREQ-MAX, PDSO16
High-Efficiency Single Stage Power Factor Correction and Step-Down Controller
|
ON Semiconductor
|
| L6560D 1577 L6560 L6560A L6560AD |
POWER FACTOR CORRECTOR
From old datasheet system
POWER FACTOR CORRECTOR
|
ST Microelectronics
STMicroelectronics
|
| FAN4803CP-1 FAN4803CP-2 FAN4803CS-2 FAN4803 FAN480 |
8-Pin PFC and PWM Controller Combo 1 A POWER FACTOR CONTROLLER WITH POST REGULATOR, 67 kHz SWITCHING FREQ-MAX, PDSO8
Power Factor Correction (PFC) and PWM Controller Combo
|
Fairchild Semiconductor, Corp.
FAIRCHILD[Fairchild Semiconductor]
|
| V23818-K305-L17 V23818-K305-L55 V23818-K305-L57 V2 |
Transceivers by Form-factor MSA - Multimode 850nm VCSEL TRX, (AC/AC coupling), 1.25 GBit/s LC, 2x5, 3.3V
Small Form Factor Multimode 850 nm 1.0625 GBd Fibre Channel 1.25 Gigabit Ethernet Transceiver 2x5 Pinning with LC Connector
Small Form Factor Multimode 850 nm 1.0625 GBd Fibre Channel 1.25 Gigabit Ethernet Transceiver 2x5 Pinning with LC⑩ Connector
SMALL FORM FACTOR MULTIMODE 850 NM 1.0625 GBD FIBRE CHANNEL 1.25 GIGABIT ETHERNET TRANSCEIVER 2X5 PINNING WITH LC⒙ CONNECTOR
Small Form Factor Multimode 850 nm 1.0625 GBd Fibre Channel 1.25 Gigabit Ethernet Transceiver 2x5 Pinning with LCConnector
|
Infineon Technologies AG
|
| BOURNSINC-PM40-390K PM40-1R8K PM40-120K PM40-271K |
Ferrite Bead Inductor; Series:PM40; Inductance:1.8uH; Inductance Tolerance: /- 10 %; Q Factor:50; Self Resonant Frequency:60MHz; Terminal Type:PCB Surface Mount; Core Material:Powdered Iron; Current Rating:390mA
Ferrite Bead Inductor; Series:PM40; Inductance:12uH; Inductance Tolerance: /- 10 %; Q Factor:50; Self Resonant Frequency:18MHz; Terminal Type:PCB Surface Mount; Core Material:Powdered Iron; Current Rating:225mA
Ferrite Bead Inductor; Series:PM40; Inductance:270uH; Inductance Tolerance: /- 10 %; Q Factor:30; Self Resonant Frequency:3MHz; Terminal Type:PCB Surface Mount; Core Material:Ferrite; Current Rating:92mA
Ferrite Bead Inductor; Series:PM40; Inductance:120uH; Inductance Tolerance: /- 10 %; Q Factor:40; Self Resonant Frequency:6MHz; Terminal Type:PCB Surface Mount; Core Material:Powdered Iron; Current Rating:110mA
Ferrite Bead Inductor; Series:PM40; Inductance:1.5uH; Inductance Tolerance: /- 10 %; Q Factor:50; Self Resonant Frequency:70MHz; Terminal Type:PCB Surface Mount; Core Material:Powdered Iron; Current Rating:410mA
Ferrite Bead Inductor; Series:PM40; Inductance:680nH; Inductance Tolerance: /- 20 %; Q Factor:30; Self Resonant Frequency:160MHz; Terminal Type:PCB Surface Mount; Current Rating:450mA; Leaded Process Compatible:No
1 ELEMENT, 0.27 uH, GENERAL PURPOSE INDUCTOR, SMD
|
BOURNS INC
|
