| PART |
Description |
Maker |
| M685 M685-02-AB-AD M685-01-BA-BH M685-01-BB-BD M68 |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 625 MHz
DUAL SAW, SELECTABLE FREQUENCY VCSO
From old datasheet system
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 161.1328 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 672.16 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 164.3555 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 155.52 MHz
|
http://
ICST[Integrated Circuit Systems]
INTEGRATED DEVICE TECHNOLOGY INC
|
| VS-5020-BCJ-HXX1-480M000000 VS-5020-BCE-KXX1-480M0 |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 480 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 640 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 1330 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 983.04 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 696.4215 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 930 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 300 MHz - 1350 MHz
|
VECTRON INTERNATIONAL
|
| VCO600A666.5143MHZ VCO-600A VCO600A155.52MHZ VCO60 |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 311.04 MHz MINIATURE, CERAMIC, SO-28
Voltage Controlled Saw Oscillator
|
Vectron International, Inc.
VECTRON[Vectron International, Inc]
|
| VSPM634D-622.08MHZ |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 622.08 MHz
|
CONNOR WINFIELD CORP
|
| VCO600A-155.520MHZ |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 155.52 MHz
|
Power-One, Inc.
|
| NBVSPA027LN1TAG NBVSPA018LN1TAG NBVSPA015 NBVSPA01 |
3.3 V, LVDS Voltage-Controlled Clock Oscillator (VCXO) PureEdge Product Series
|
ON Semiconductor
|
| VX-509 VX-5090-EAE-GXBX-10M0000000 |
Hi-Reliability Voltage Controlled Crystal Oscillator
VCXO, CLOCK, 10 MHz, ACMOS OUTPUT
|
Vectron International, Inc
|
| VC-501-DFC-GAA-100 VC-501-DFC-GFA-100 VC-501-DFF-G |
VCXO, CLOCK, 125 MHz, PECL OUTPUT
VCXO, CLOCK, 167.3316 MHz, PECL OUTPUT
VCXO, CLOCK, 156.25 MHz, PECL OUTPUT
VCXO, CLOCK, 100 MHz, PECL OUTPUT
VOLTAGE CONTROLLERED CRYSTAL OSCILLATOR
Voltage Controlled Crystal Oscillator
|
VECTRON INTERNATIONAL
ETC
|
| X24165 X24165P X24165P-2.7 X24165PI X24165PI-2.7 X |
Hot Swap Controller IC; Hot Swap Controller Type:Negative Voltage; Controlled Voltage Min:-10V; Controlled Voltage Max:-80V; Number of Controlled Voltages:1; Package/Case:8-SOIC; Power Good Output:Active Low
Hot Swap Controller IC; Hot Swap Controller Type:Negative Voltage; Controlled Voltage Min:-10V; Controlled Voltage Max:-80V; Number of Controlled Voltages:1; Package/Case:8-SOIC; Power Good Output:Active High
IC LDO REG 3A 5.5V W/ENBL 8-SOIC
Advanced 2-Wire Serial E2PROM with Block Lock Protection
|
XICOR[Xicor Inc.]
|
