| PART |
Description |
Maker |
| HG3504/12-G |
WIPER INTERMITTENT CONTROLLER
|
Hongfa Technology
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| KK33197AN-01 KK33197AD-01 KK33197AD KK33197AN |
Automotive Wash Wiper Timer
|
KODENSHI KOREA CORP.
|
| UU642 |
INTERVAL AND WIPE - WASH WIPER CONTROL IC
|
UNISONIC TECHNOLOGIES
|
| U690B |
Rear Wiper Interval/Wipe-Wash Control
|
TEMIC[TEMIC Semiconductors]
|
| U842B U842B-FP |
Wiper Control for Intermittent and Wipe/ Wash Mode
|
TEMIC[TEMIC Semiconductors]
|
| U641B-MFPG3Y U641B-MFPY U641B-MY U641B_05 U641B U6 |
Interval and Wipe/Wash Wiper Control IC with Delay
|
ATMEL[ATMEL Corporation]
|
| U642B U642B-FP |
Interval- and Wipe/ Wash Wiper Control IC
From old datasheet system
|
Atmel Corp.
ATMEL[ATMEL Corporation]
|
| MCP4331 MCP4361 MCP4362 |
(MCP434x / MCP436x) 7-bit (129 Wiper Steps) Digital Potentiometers
|
Microchip Technology
|
| ISL22329 |
Dual Digitally Controlled Potentiometers (XDCP; Low Noise, Low Power, I-2CBus, 128 Taps, Wiper Only
|
Intersil
|
