| PART |
Description |
Maker |
| TC9402 TC9400 TC9402CPD TC9400COD TC9400CPD TC9400 |
The TC9400/TC9401/TC9402 are low-cost voltage-to-frequency (V/F)converters utilizing low power CMOS technology. The converters accept a variable analog input signal and generate an output pulse train whose frequency is linearly proportiona
Voltage-to-Frequency/Frequency-to-Voltage Converters
|
Microchip Technology
|
| 310-025105-021 |
Filtered Low Noise Ampli er
|
Spectrum Microwave, Inc.
|
| 310-025103-012 |
Filtered Low Noise Ampli er
|
Spectrum Microwave, Inc.
|
| 310-025107-022 |
Filtered Low Noise Ampli er
|
Spectrum Microwave, Inc.
|
| 310-024109-011 024109-011 |
Filtered Low Noise Ampli er
|
API Technologies Corp
Spectrum Microwave, Inc.
|
| SY02-MFTC |
SYNCHRONOUS EQUIPMENT LOW IN/OUTPUT FREQUENCY CLOCK REGENERATOR LVPECL/LVCMOS OUTPUT
|
Raltron Electronics Corporation
|
| R1210N361D-TR R1210N361C-TL R1210N361D-TL R1210N36 |
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 100kHz with a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 100kHz with a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 100kHz without a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 180kHz without a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 180kHz without a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 100kHz with a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 100kHz with a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 100kHz without a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 180kHz without a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.5V. Oscillator frequency 100kHz with a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.5V. Oscillator frequency 100kHz without a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.5V. Oscillator frequency 100kHz with a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 180kHz without a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 100kHz without a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 100kHz without a frequency change-over cicuit. Taping specification TL
PWM Step-up DC/DC Converter
CAP 22PF 200V 5% NP0(C0G) DIP-2 TUBE-PAK S-MIL-PRF-39014/22
CAP 0.47UF 50V 10% X7R DIP-2 TUBE-PAK R-MIL-PRF-39014/22 SWITCHING REGULATOR, 216 kHz SWITCHING FREQ-MAX, PDSO5
SMPS Controller 开关电源控制器
|
Ricoh Co., Ltd.
EPCOS AG
Maxim Integrated Products, Inc.
RICOH electronics devic...
|
| 2SB0987 |
For low-frequency output amplification
|
Panasonic
|
| 2SB766A |
LOW FREQUENCY OUTPUT AMPLIFICATION
|
Unisonic Technologies
|
| AN7191Z |
Dual 20W BTL Low Frequency Power Amplifier IC for Output
|
Panasonic
|
| ICS97ULP877A ICS97ULP877AHLF-T ICS97ULP877AKLF-T |
97ULP SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PBGA52
1.8V Low-Power Wide-Range Frequency Clock Driver
|
INTEGRATED DEVICE TECHNOLOGY INC
Integrated Circuit Systems
|
| 2SB766 2SB766A 2SD874A 2SB0766A 2SB0766 2SD874 |
Silicon PNP epitaxial planer type(For low-frequency output amplification)
|
PANASONIC[Panasonic Semiconductor]
|
