| PART |
Description |
Maker |
| STGIPL14K60 |
IGBT intelligent power module (IPM) 14 A, 600 V, DBC isolated SDIP-38L molded
|
STMicroelectronics
|
| HLNB006-299TG NB017-01TG LNB011-04GG NB011-01GG HN |
6 POS MOLDED SIP SOCKET SIP6, IC SOCKET
17 POS MOLDED SIP SOCKET SIP17, IC SOCKET
11 POS MOLDED SIP SOCKET SIP11, IC SOCKET
10 POS MOLDED SIP SOCKET SIP10, IC SOCKET
32 POS MOLDED SIP SOCKET SIP32, IC SOCKET
15 POS MOLDED SIP SOCKET SIP15, IC SOCKET
16 POS MOLDED SIP SOCKET SIP16, IC SOCKET
|
Advanced Interconnections, Corp.
ADVANCED INTERCONNECTIONS CORP
|
| STGIPN3H60A |
SLLIMM(TM)-nano small low-loss intelligent molded module IPM, 3 A - 600 V 3-phase IGBT inverter bridge
|
ST Microelectronics
|
| 9250-684-RC 9250-332-RC 9250-182-RC 9250-122-RC 92 |
CHOKE RF MOLDED 680UH FERRITE 1 ELEMENT, 680 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 3.3UH IRON 1 ELEMENT, 3.3 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 1.8UH IRON 1 ELEMENT, 1.8 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 1.2UH IRON 1 ELEMENT, 1.2 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 3900UH FERRITE 1 ELEMENT, 3900 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED .68UH PHENOLIC 1 ELEMENT, 0.68 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 18UH FERRITE 1 ELEMENT, 18 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 82UH FERRITE 1 ELEMENT, 82 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 15UH FERRITE 1 ELEMENT, 15 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED .47UH PHENOLIC 1 ELEMENT, 0.47 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
RF Choke; Series:9250; Inductance:4.7uH; Inductance Tolerance: /- 10 %; Q Factor:44; Self Resonant Frequency:70MHz; Terminal Type:Axial Leaded; Core Material:Iron; Current Rating:380mA; DC Resistance Max:0.55ohm
|
Bourns, Inc.
BOURNS INC
|
| FP7G100US60 |
Transfer Moded Type IGBT Module
Transfer Molded Type IGBT Module
|
Fairchild Semiconductor
|
| IMC-1210-SY-10N-M-100 IMC-1210-100 |
Molded, Wirewound Inductor. Tested at 100KHz
Surface Mount, Molded Inductor 表面贴装，模压电
|
Vishay Siliconix
Vishay Intertechnology,Inc.
Vishay Intertechnology, Inc.
|
| 1201135063 SD-120113-021 120113-5063 |
Nano-Change Molded Junction Box, Top Mount with Molded Cable, 90° Angle, 4 Ports
Nano-Change Molded Junction Box, Top Mount with Molded Cable, 90掳 Angle, 4 Ports
MOLEX Connector
|
Molex Electronics Ltd.
|
| ET1-B3M1 2200 2203 ET1F ET2-B3M1 ET1F-B3M1 ET1-B3M |
T-1 Subminiature Lamps
T-1SubminiatureLamps
CAT5E PATCH CORD, 3FT PURPLE, MOLDED
; Forward Current:30mA; Forward Voltage:160V; LED Color:Green; Lens Color:Clear RoHS Compliant: No
Connector assemblies, Network cables; Drop Ship:Yes
CAT5E PATCH CORD, 20FT PINK, MOLDED
CAT5E PATCH CORD, 100FT BLACK, MOLDED
CAT5E PATCH CORD, 1FT PURPLE, MOLDED
CAT5E PATCH CORD, 20FT BLUE, MOLDED
Connector,D-Shell,Cable Mnt,RECEPT,79 Contacts,PIN,0.075 Pitch,#4-40
CAT5E PATCH CORD, 25FT PINK, MOLDED
T-1Subminiature Lamps 的T 1?微型灯
Push-pull coupling, HRS unique design, Small and lightweight interface; HRS No: 110-0052-0 00; Shell Size (dia): 10; Operating Temperature Range (degrees C): -25 to 85; General Description: Accessory; Dust cap 的T 1微型灯泡
CAT5E PATCH CORD, 20FT BLUE, MOLDED 的T 1微型灯泡
T-1 Subminiature Lamps T 1微型灯泡
T-1 Subminiature Lamps 的T 1微型灯泡
|
Gilway Technical Lamp
GilwayTechnicalLamp
International Light Technologies Inc.
International Light Technologies, Inc.
http://
|
| 1641R-183K 1641-332K 1641-392K 1641-561K 1641R-223 |
COIL 18.0UH MOLDED SHIELDED 1 ELEMENT, 18 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
COIL 3.3UH MOLDED SHIELDED 1 ELEMENT, 3.3 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR
COIL 3.9UH MOLDED SHIELDED 1 ELEMENT, 3.9 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR
COIL .56UH MOLDED SHIELDED 1 ELEMENT, 0.56 uH, PHENOLIC-CORE, GENERAL PURPOSE INDUCTOR
COIL 22.0UH MOLDED SHIELDED 1 ELEMENT, 22 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
COIL .15UH MOLDED SHIELDED 1 ELEMENT, 0.15 uH, PHENOLIC-CORE, GENERAL PURPOSE INDUCTOR
COIL 1.0UH MOLDED SHIELDED 1 ELEMENT, 1 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR
COIL .47UH MOLDED SHIELDED 1 ELEMENT, 0.47 uH, PHENOLIC-CORE, GENERAL PURPOSE INDUCTOR
COIL 1.5UH MOLDED SHIELDED 1 ELEMENT, 1.5 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR
COIL 39.0UH MOLDED SHIELDED 1 ELEMENT, 39 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
COIL .68UH MOLDED SHIELDED 1 ELEMENT, 0.68 uH, PHENOLIC-CORE, GENERAL PURPOSE INDUCTOR
COIL 2.2UH MOLDED SHIELDED 1 ELEMENT, 2.2 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR
COIL 560.UH MOLDED SHIELDED 1 ELEMENT, 560 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
COIL 680.UH MOLDED SHIELDED 1 ELEMENT, 680 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
1 ELEMENT, 390 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
|
API Delevan
|
| AIAM-02-R82K AIAM-02-6R8K AIAM-02-681J AIAM-02-R68 |
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 0.82 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 6.8 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 680 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 0.68 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 0.22 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 160 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 1.5 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 3.3 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 22 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 110 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 240 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 130 uH, GENERAL PURPOSE INDUCTOR
|
Abracon, Corp.
|
| 271F 271G MDP14 MDP16-01-101G MDP16-01-101J MDP16- |
Dual Inline Package, Molded DIP, 01, 03, 05 Schematics, Rugged, Molded Case Construction, Highly Stable, Automatic Insert Compatible, Uniform Performance Characteristics, Available in Tube Pack
Thick Film Resistor Networks Dual-In-Line Molded DIP 01 03 05 Schematics
(MDP14 / MDP16) Thick Film Resistor Networks
Sound/Security Multiconductor Cable; Number of Conductors:2; Conductor Size AWG:18; No. Strands x Strand Size:7 x 26; Jacket Material:Polyvinylchloride (PVC); Leaded Process Compatible:Yes; Capacitance:65pF/ft RoHS Compliant: Yes
Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics 厚膜电阻网络，双列直插，模压浸，0135电路
|
VISAY[Vishay Siliconix]
Vishay Intertechnology,Inc.
Vishay Intertechnology, Inc.
|
|
