| PART |
Description |
Maker |
| SO-512.00-300-1.33 SO-314.00-500-0.8 SO-154.80-600 |
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 511.7 MHz - 512.3 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 313.5 MHz - 314.5 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 154.2 MHz - 155.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 716.3 MHz - 717.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 716.8 MHz - 717.8 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 124.8 MHz - 125.2 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 514.6 MHz - 515.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 254.6 MHz - 254.8 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 833.3 MHz - 834.1 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 99 MHz - 101 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 622.1 MHz - 622.9 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 299.7 MHz - 300.3 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 269.5 MHz - 270.5 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 724.55 MHz - 725.05 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 376.59 MHz - 378.59 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 776.7 MHz - 777.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 142.6 MHz - 143.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 716.5 MHz - 717.5 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 929.7 MHz - 930.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 774.7 MHz - 775.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 445.6 MHz - 446 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 965.7 MHz - 966.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 644.6 MHz - 645.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 661.68 MHz - 662.48 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 319.9 MHz - 320.1 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 694.6 MHz - 695.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 859.7 MHz - 860.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 724.6 MHz - 725.4 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 1023.7 MHz - 1024.3 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 600 MHz - 600.6 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 607.1 MHz - 607.9 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 499.6 MHz - 500.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 949.894 MHz - 950.594 MHz
|
Spectrum Control, Inc.
Abracon, Corp.
Cree, Inc.
Vishay Intertechnology, Inc.
LEDtronics, Inc.
Electronic Theatre Controls, Inc.
IRC Advanced Film
Pascall Electronics, Ltd.
ITT, Corp.
TE Connectivity, Ltd.
SPECTRUM CONTROL INC
|
| VS-5020-BCJ-HXX1-480M000000 VS-5020-BCE-KXX1-480M0 |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 480 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 640 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 1330 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 983.04 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 696.4215 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 930 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 300 MHz - 1350 MHz
|
VECTRON INTERNATIONAL
|
| X9511_07 X9511 X9511WP X9511WPI X9511WPIZ X9511WPZ |
The Intersil X9511 is a push button controlled potenti ometer that is ideal for push button controlled resis tance trimming
Single Push Button Controlled Potentiometer (
|
INTERSIL[Intersil Corporation]
|
| AD8370ARE AD8370-EVAL AD8370 AD8370ARE-REEL7 |
750MHz Digitally Controlled Variable Gain Amplifier
LF to 750 MHz Digitally Controlled VGA
|
AD[Analog Devices]
|
| M660-01-BK M660-01 M660-01-BA M660-01-BB M660-01-B |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 167.2828 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 168.04 MHz
Voltage Controlled SAW Oscillator
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 156.8324 MHz
|
Integrated Circuit Syst...
INTEGRATED DEVICE TECHNOLOGY INC
ICST[Integrated Circuit Systems]
|
| 2N640004 2N6401G 2N6426G 2N6405G 2N6400 2N6401 2N6 |
Silicon Controlled Rectifier 16A 400V
Darlington Transistors NPN Silicon
Silicon Controlled Rectifiers SCRs 16 AMPERES RMS 50 thru 800 VOLTS
|
ONSEMI[ON Semiconductor]
|
| X24165 X24165P X24165P-2.7 X24165PI X24165PI-2.7 X |
Hot Swap Controller IC; Hot Swap Controller Type:Negative Voltage; Controlled Voltage Min:-10V; Controlled Voltage Max:-80V; Number of Controlled Voltages:1; Package/Case:8-SOIC; Power Good Output:Active Low
Hot Swap Controller IC; Hot Swap Controller Type:Negative Voltage; Controlled Voltage Min:-10V; Controlled Voltage Max:-80V; Number of Controlled Voltages:1; Package/Case:8-SOIC; Power Good Output:Active High
IC LDO REG 3A 5.5V W/ENBL 8-SOIC
Advanced 2-Wire Serial E2PROM with Block Lock Protection
|
XICOR[Xicor Inc.]
|
| ADG731BCP-REEL7 ADG731BSU ADG731BSU-REEL ADG731BSU |
16-/32-Channel, Serially Controlled 3.5 Ohm 1.8 V to 5.5 V, ±2.5 V, Analog Multiplexer 32-CHANNEL, SGL ENDED MULTIPLEXER, QCC48
16-/32-Channel, Serially Controlled 4 1.8 V to 5.5 V, 2.5 V, Analog Multiplexers
16-/32-Channel, Serially Controlled 4, 1.8 V to 5.5 V, 2.5 V, Analog Multiplexers
16-/32-Channel, Serially Controlled 4 1.8 V to 5.5 V, 2.5 V, Analog Multiplexers
|
Analog Devices, Inc.
|
| VS-55006 VS-550-LFF-HNN-P4-R3 VS-550-LFF-HNN-P4-R5 |
Dual Frequency VCSO
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 644.5313 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 657.4219 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 625 MHz
|
Vectron International, Inc
|
| 2N2323 JANTX2N2323 JANTX2N2323A JANTX2N2323AS JANT |
SILICON CONTROLLED RECTIFIER
SILICON CONTROLLED RECTIFIER 0.3454 A, 200 V, SCR, TO-5
SILICON CONTROLLED RECTIFIER 1.6 A, 200 V, SCR, TO-205AD
LED RED DIFFUSED 1.8X3.5MM RECT SCR, TO-39
|
MICROSEMI[Microsemi Corporation]
Microsemi, Corp.
|
| VCO600A666.5143MHZ VCO600A622.080MHZ VCO600A155.52 |
Voltage Controlled Saw Oscillator VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 311.04 MHz
Voltage Controlled Saw Oscillator VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 368.64 MHz
|
Vectron International, Inc.
|
| BT152F-600 BT152F |
600V Vdrm 20A Sensitive Gate Silicon Controlled Rectifier, 1.7@40AV Peak On-State Voltage, 200V/μs Rise of Off-State Voltage
Silicon Controlled Rectifiers
|
SEMIWELL[SemiWell Semiconductor]
|
|
