| PART |
Description |
Maker |
| M670-693.4830 M670 M670-155.5200 M670-156.2500 M67 |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 168.04 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 669.3265 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 690.5692 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 627.3296 MHz
XTAL MTL SMT HC49/USM
CONNECTOR ACCESSORY
VOLTAGE CONTROLLED SAW OSCILLATOR
|
INTEGRATED DEVICE TECHNOLOGY INC
ICST[Integrated Circuit Systems]
http://
Integrated Circuit Syst...
|
| MC100EP35DR2 MC100EP33D NB100LVEP17MN |
3.3V / 5V ECL JK Flip Flop
3.3V / 5V ECL ÷4 Divider
2.5 V / 3.3 V ECL Quad Differential Driver/Receiver
|
ON Semiconductor
|
| MC10E1651 |
5V, -5V ECL Dual ECL Output Comparator With Latch(5V/-5V ECL，双ECL输出比较器（带锁存器
|
ON Semiconductor
|
| X24042 X24042P X24042P-2.7 X24042P-3 X24042PI X240 |
4K (512 x 8bit) serial E2PROM
Hot Swap Controller IC; Hot Swap Controller Type:Negative Voltage; Controlled Voltage Min:-10V; Controlled Voltage Max:-80V; Number of Controlled Voltages:1; Package/Case:8-SOIC; Power Good Output:Active High
|
XICOR[Xicor Inc.]
|
| VC-400-JFF-505H155.52 VC-400 VC-400-CCB-205G155.52 |
VCXO, CLOCK, 155.52 MHz, ECL OUTPUT
VCXO, CLOCK, 10 MHz - 170 MHz, PECL OUTPUT
VCXO, CLOCK, 10 MHz - 170 MHz, ECL OUTPUT
VCXO, CLOCK, 155.52 MHz, PECL OUTPUT
Voltage Controlled Crystal Oscillators (VCXO’s)
Voltage Controlled Crystal Oscillators (VCXO??)
|
VECTRON[Vectron International, Inc]
|
| EE14-541 EE14-541-125.00MHZ EE14-531 EE14-531-125. |
CRYSTAL CONTROLLED OSCILLATORS 14 PIN 3.3V ECL CLOCK OSCILLATOR
|
List of Unclassifed Manufacturers
ETC
|
| MC100EL07DTR2 MC100EP33DR2 MC100EL38 |
5V ECL 2-Input XOR/XNOR
3.3V / 5V ECL ÷4 Divider
5V ECL Divide by 2, Divide by 4/6 Clock Generation Chip
|
ON Semiconductor
|
| MC10H106 MC100EL29DWR2 MC10H117 MC10H117FN MC100EP |
Triple 4-3-3-Input NOR Gate
5V ECL Dual Differential Data and Clock D Flip-Flop With Set and Reset
Dual 2-Wide 2-3-Input OR-AND/OR-AND-Invert Gate
3.3V / 5V ECL Differential Receiver/Driver with Variable Output Swing
5V ECL 2-Input XOR/XNOR
4-Wide OR-AND/OR-ANDbar Gate
5V ECL 1:2 Differential Fanout Buffer
3.3V / 5V ECL 6-Bit Differential Register with Master Reset
3.3V ECL Triple D-Type Flip-Flop with Set and Reset
3.3V / 5V ECL ÷2 Divider
5V ECL Differential Data and Clock D Flip-Flop
|
ON Semiconductor
|
| VS-705-LFF-HABN657M421875 VS-705-MGF-GABN657M42187 |
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 657.421875 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 320 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 768 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 125 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 983.04 MHz
|
VECTRON INTERNATIONAL
|
| MC10H109FNR2 MC10H131 MC100EP140 MC100E155FN MC100 |
Dual 4-5-Input OR/NOR Gate
Dual Type D Master-Slave Flip-Flop
3.3V ECL Phase-Frequency Detector
5V ECL 6-Bit 2:1 Mux Latch
5V ECL Differential Data and Clock D Flip-Flop
3.3 V 1:9 Differential HSTL/PECL to HSTL Clock Driver with LVTTL Clock Select and Enable
3.3V ECL 1:15 Differential ÷1/÷2 Clock Driver
ECL/TTL Clock Driver
3.3V / 5V 2-Input Differential AND/NAND
5V ECL 2:1 Multiplexer
3.3V / 5V ECL JK Flip Flop
3.3V ECL 1:4 ÷ 1/÷ 2 Clock Fanout Buffer
3.3V / 5V Hex Differential Line Receiver / Driver
3.3V 10-bit LVTTL/LVCMOS to LVPECL Translator
Dual 2-Bit Adder/Subtractor
|
ON Semiconductor
|
| VS-751-LFF-HNN-R4-R6 VS-751-LFF-GNN-PB-R3 VS-751-L |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 690.5692 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 657.4219 MHz
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 624.6938 MHz
|
VECTRON INTERNATIONAL
|
