| PART |
Description |
Maker |
| MCH6542 |
Push-Pull Circuit Applications
|
Sanyo Semicon Device
|
| FP205 |
Push-Pull Circuit Applications
8-BIT SINGLE-CHIP MICROCOMPUTER (WITH A/D CONVERTER)
|
http://
SANYO[Sanyo Semicon Device]
Sanyo Electric Co.,Ltd.
|
| CPH6528 |
PNP/NPN Epitaxial Planar Silicon Transistor Push-Pull Circuit Applications 进步瑞展硅晶体管推挽电路的应
|
Sanyo Electric Co., Ltd.
Sanyo Semicon Device
|
| NVT2004 NVT2006 NVT2004TL NVT2003DP |
Bidirectional voltage-level translator for open-drain and push-pull applications
|
NXP Semiconductors
|
| HV513 |
8-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs, POL, Hi-Z, and Short Circuit Detect
|
Supertex Inc
Supertex, Inc.
|
| MB3759 MB3759C MB3759P MB3759PF |
Pulse-Width-Modulation Control Circuit
Switching Regulator Controller (Switchable between push-pull and single-end functions)
|
Fujitsu Microelectronics
FUJITSU[Fujitsu Media Devices Limited]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| ISL6740 ISL6740IB ISL6740IBZ ISL6740IVZ ISL6741IVZ |
Flexible Double Ended Voltage and Current Mode PWM Controllers
PWM controller for hard-switched full bridge and push-pull applications
|
INTERSIL[Intersil Corporation]
|
| MCP100 MCP101 |
Microcontroller Supervisory Circuit with Push-Pull Output
|
Microchip Technology
|
| HN7G06FU |
Power Management Switch Applications, Inverter Circuit Applications, Driver Circuit Applications and Interface Circuit Applications
|
Toshiba Semiconductor
|
| LTC1450CN LTC1450LCN LTC1450CG |
Parallel Input, 12-Bit Rail-to-Rail Micropower DACs in SSOP
Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-TSSOP 0 to 70
Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-SOIC 0 to 70 PARALLEL, WORD INPUT LOADING, 14 us SETTLING TIME, 12-BIT DAC, PDSO24
|
Linear Technology Corporation
Linear Technology, Corp.
|
| 006200167032800 00110930040 |
pUSH-pULL CONNECTORS
|
AVX Corporation
Amphenol Corporation
|
