| PART |
Description |
Maker |
| ORA5076 ORA5152 ORA5180 ORA5060 |
Dual Non-unity gain stable u-power CMOS Op Amp. Quad Non-unity gain stable, -40C to 85C, 8-SOIC 150mil, TUBE
Single Non-unity gain stable u-power CMOS Op Amp. Single w/Chip Select Non-unity, -40C to 85C, 8-PDIP, TUBE
Optoelectronic 光电
|
|
| MCP6041T MCP6044 |
600 nA, Rail-to-Rail Input/Output Op Amps 600 nA的，轨到轨输输出运算放大
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| 5962-9455804NZB 5962-9455804QXA 5962-9455802QYA |
16-Bit Digital Signal Processor
SOT23, Rail-to-Rail, Fixed-Gain, Gain Amps/Open-Loop Op Amps 16位数字信号处理器
|
Electronic Theatre Controls, Inc.
|
| HA1-2841_883 HA1-2841883 HA7-2841883 HA7-2841_883 |
WIDEBAND, FAST SETTLING, UNITY GAIN STABLE, VIDEO OPERATIONAL AMPLIFIER
Wideband/ Fast Settling/ Unity Gain Stable/ Video Operational Amplifier
From old datasheet system
|
INTERSIL[Intersil Corporation]
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| MSK707-15 |
Unity Gain Bandwidth - 220 MHz Typical
|
M.S. Kennedy Corporatio...
|
| HA-5101 |
Op Amp, 10MHz, Low Noise, Unity Gain Stable
|
Intersil
|
| NE577 SA577N NE577D NE577N SA577 SA577D |
Unity gain level programmable low power compandor
|
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
| EL2224D |
Dual 60MHz Unity Gain Stable, Operational Amplifier
|
ELANTEC[Elantec Semiconductor]
|
| 5962-89641012A 5962-8964101CA |
Wideband Unity-Gain Stable Fast Settling Op Amp
|
Analog Devices
|
| AMP0303 AMP03GS-REEL 5962-9563901MGA AMP03 AMP03BJ |
From old datasheet system
Precision, Unity-Gain Differential Amplifier
|
AD[Analog Devices]
|
