| PART |
Description |
Maker |
| 3CN00353AA |
Telecomm/Datacomm 电信/数据通信
|
Sony, Corp.
|
| TOAD347-RX |
Telecomm/Datacomm 电信/数据通信
|
Electronic Theatre Controls, Inc.
|
| V23818-H18-L47 |
Telecomm/Datacomm 电信/数据通信
|
Infineon Technologies AG
|
| L7581 L8581 |
Ringing / Tip/Ring and Line Card Access Switches
Telecomm/Datacomm 电信/数据通信
|
Agere Systems
Lineage Power, Corp.
|
| VSC9118 |
10 Gb/s / Quad 2.5 Gb/s Multi-Service SONET/SDH Mapper Device with Virtual Concatenation
Telecomm / Datacomm
|
http://
Vitesse Semiconductor Corporation.
|
| SI-3012-KS |
Telecomm/Datacomm, Other - Datasheet Reference
From old datasheet system
|
Silicon Laboratories
|
| G65SC51 G65SC51-1 G65SC51-2 G65SC51-3 G65SC51-4 G6 |
CMOS ASYNCHRONOUS COMMUNICATIONS INTERFACE ADAPTER
Telecomm/Datacomm
Communications Interface 通信接口
|
California Micro Devices Co...
CALMIRCO[California Micro Devices Corp]
California Micro Devices Corporation
|
| VSC9180 |
VSC9180 Arapahoe - 2.5G SONET/SDH Backplane Transceiver
VSC9180 Arapahoe - 2.5G SONET/SDH Backplane Transceiver
Telecomm / Datacomm
|
Vitesse Semiconductor Corporation
http://
|
| VSC9187 |
Telecomm / Datacomm
VSC9187 Bromley - 3045 x 3045 VT1.5 TSI Switch Fabric
VSC9187 Bromley - 3045 x 3045 VT1.5 TSI Switch Fabric
|
Vitesse Semiconductor Corporation
http://
|
| 25AA160 25C160 25LC160 25LC160T-ISN 25C160T-ISN 25 |
Power Source Selector for Dual-Battery Systems
Voltage-Positioning Evaluation Kit for the MAX1711
Evaluation Kit for the MAX1773
Evaluation Kit for the MAX1844
The 25LC160 is a 16K bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and dat
The 25C160 is a 16K bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data
The 25AA160 is a 16K-bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and dat
|
Microchip
|
