| PART |
Description |
Maker |
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| L293DD013TR L293D L293DD L293D03 L293B-03 L293D-03 |
PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMICROELECTRONICS[STMicroelectronics]
ST Microelectronics
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| HV57708PG RBHV57708DG HV57708 HV57708DG HV57708X |
32 MHz, 64-Channel Serial To Parallel Converter With Push-Pull Outputs EL DISPLAY DRIVER, CQFP80
32 MHz 64-Channel Serial To Parallel Converter With Push-Pull Outputs
|
Supertex, Inc.
SUTEX[Supertex Inc]
SUTEX[Supertex, Inc]
|
| AAT4296 AAT4298 |
Five/Six Channel Push/Pull I/O Expander
|
Advanced Analogic Technologies
|
| L293B03 |
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMicroelectronics
|
| EL620807 |
Dual Push-Pull Laser Driver Oscillator
|
Intersil Corporation
|
| MX877 MX877R MX877RTR |
8-Channel, 60V Driver with Push-Pull Output, 3 Wire Interface
|
Clare, Inc.
|
| HV58306 HV583X |
128-Channel Serial to Parallel Converter with Push-Pull Outputs
|
http://
Supertex, Inc
|
| MAX9018A MAX9018B MAX9015A MAX9017B MAX9017A MAX90 |
"SOT23, Dual, 1.8V, Nanopower, Comparator With 1% Reference (Open- Drain)"
"SOT23, Dual, 1.8V, Nanopower, Comparator With 1.75% Reference (Open- Drain)"
"SOT23, Single, 1.8V, Nanopower, Comparator With 1% Reference (Push/Pull)"
"SOT23, Dual, 1.8V, Nanopower, Comparator With 1.75% Reference (Push/ Pull)"
" SOT23, Dual, 1.8V, Nanopower, Comparator With 1% Reference (Push/Pull)"
" SOT23, Single, 1.8V, Nanopower, Comparator With 1% Reference (Open-Drain)"
"SOT23, Dual, 1.8V, Nanopower Comparators with Open- Drain Output"
"SOT23, Dual, 1.8V, Nanopower Comparators with Push-Pull Output"
|
Maxim
|
| L2293Q |
Push-pull four channel driver with diodes
Push-pull four channel driver with diodes
|
STMicroelectronics
|
|
