| PART |
Description |
Maker |
| GL527 |
(GL527 - GL538) 5MM RESIN MOLD TYPE INFRARED LIGHT EMITTING DIODE
|
Sharp Electrionic Components
|
| PT380 PT381F PT380F PT381 |
High Sensitivity, o 3mm Resin Mold Type Phototransistor
High Sensitivity, f 3mm Resin Mold Type Phototransistor
High Sensitivity/ f 3mm Resin Mold Type Phototransistor
|
SHARP[Sharp Electrionic Components]
|
| GL4B610 GL4600 GL4610 |
Double Ended Mold Type Infrared Emitting Diode
|
SHARP[Sharp Electrionic Components]
|
| AC08FSMA AC08DSMA |
8A resin insulating TRIAC
(AC08DSMA / AC08FSMA) 8A RESIN INSULATION TYPE TRIAC
8A RESIN INSULATION TYPE TRIAC 8A条树脂绝缘型可控
ECONOLINE: RB & RA - Dual Output from a Single Input Rail- Power Sharing on Output- Industry Standard Pinout- 1kVDC & 2kVDC Isolation- Custom Solutions Available- UL94V-0 Package Material- Efficiency to 85% 8A条树脂绝缘型可控
|
NEC[NEC]
NEC Corp.
NEC, Corp.
|
| IR500N-E0 |
5mm Lamp Type 940nm Infrared Emitter
|
CT Micro International ...
|
| RPI-221 |
Sensors > Photointerrupters > Linear Phototransistor output
Photointerrupter, double-layer mold type
Photointerrupter/ double-layer mold type
|
Rohm CO.,LTD.
|
| RPI-124 |
Sensors > Photointerrupters > Linear Phototransistor output
PHOTO INTERRUPTER, DOUBLE-LAYER MOLD TYPE
Photo interrupter/ double-layer mold type
|
Rohm
|
| P722-5R P201D-5R P380-5R P1082-03 P1201 P1201-01 |
SPECIALTY OPTOELECTRONIC DEVICE
Resin coating type (5R type) 树脂涂料型（5R型）
|
Harwin PLC
Hamamatsu Photonics K.K.
HAMAMATSU[Hamamatsu Corporation]
|
| RPI-122 A5800739 RPI122 |
Photointerrupter/ double-layer mold type
PHOTOINTERRUPTER, DOUBLE-LAYER MOLD TYPE
From old datasheet system
|
Rohm CO.,LTD.
|
| PS21961-ST |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21204 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| PS21205 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
